Abstract:Underwater docking greatly facilitates and extends operation of an autonomous underwater vehicle (AUV) without the support of a surface vessel. Robust and accurate control is critically important for docking an AUV into a small underwater funnel-type dock station. In this paper, a docking system with an under-actuated AUV is presented, with special attention paid to control algorithm design and implementation. For an under-actuated AUV, the cross-track error can be controlled only via vehicle heading modulation, so both the cross-track error and heading error have to be constrained to achieve successful docking operations, while the control problem can be even more complicated in practical scenarios with the presence of unknown ocean currents. To cope with the above issues, a control scheme of a three-hierarchy structure of control loops is developed, which has been embedded with online current estimator/compensator and effective control parameter tuning. The current estimator can evaluate both horizontal and vertical current velocity components, based only on the measurement of AUV’s velocity relative to the ground; in contrast, most existing methods use the measurements of both AUV’s velocities respectively relative to the ground and the water column. In addition to numerical simulation, the proposed docking scheme is fully implemented in a prototype AUV using MOOS-IvP architecture. Simulation results show that the current estimator/compensator works well even in the presence of lateral current disturbance. Finally, a series of sea trials are conducted to validate the current estimator/compensator and the whole docking system. The sea trial results show that our control methods can drive the AUV into the dock station effectively and robustly.

Homing Path Planning and Following Control of an Autonomous Underwater Vehicle

Improved Line-of-sight Nonlinear Trajectory Tracking Control of Autonomous Underwater Vehicle Exposed to High Variable Speed Ocean Currents

Underwater Docking of an Under-Actuated Autonomous Underwater Vehicle: System Design and Control Implementation

An Underactuated AUV Tracking Algorithm Based on Backstepping Adaptive Sliding Mode Control

Terminal navigation and control for docking an underactuated autonomous underwater vehicle

A New Path Following Method of AUV Using Line-of-sight with Sideway

Trajectory Tracking Control for Subsea Cruise and Docking of Autonomous Underwater Helicopter

USV Application Scenario Expansion Based on Motion Control, Path Following and Velocity Planning

Three-Dimensional Coordination Control for Multiple Autonomous Underwater Vehicles

Homing tracking control of autonomous underwater vehicle based on adaptive integral event-triggered nonlinear model predictive control

Path Following Model Predictive Control of a Coupled Autonomous Underwater Vehicle

Path Following Based on Waypoints and Real-Time Obstacle Avoidance Control of an Autonomous Underwater Vehicle

Neural Network Model-Based Reinforcement Learning Control for AUV 3-D Path Following

Distributed Path-Following Formation Control of Multi-AUV Based on Graph Laplacian

A Control Method for Path Following of AUVs Considering Multiple Factors Under Ocean Currents

A Path Planning Approach for Multi-AUV Systems with Concurrent Stationary Node Access and Adaptive Sampling

Trajectory Tracking Controller Design for Underactuated AUVs Based on Adaptive Robust Control

Collision Avoidance and Path Point Tracking Control for Underactuated Unmanned Surface Vehicles with Unknown Model Nonlinearity

Autonomous Underwater Vehicle Cruise Positioning and Docking Guidance Scheme

Path Following Method for AUV Based on Q-Learning and RBF Neural Network

An energy efficient fault-tolerant controller for homing of underactuated AUVs