Abstract:Liquid atomization is applied in nanostructure dense coating technology to inject suspended nano-size powder materials into a suspension plasma spray (SPS) torch. This paper presents the effects of the atomization parameters on the nanoparticle processing. A numerical model was developed to simulate the dynamic behaviors of the suspension droplets, the solid nanoparticles or agglomerates, as well as the interactions between them and the plasma gas. The plasma gas was calculated as compressible, multi-component, turbulent jet flow in Eulerian scheme. The droplets and the solid particles were calculated as discrete Lagrangian entities, being tracked through the spray process. The motion and thermal histories of the particles were given in this paper and their release and melting status were observed. The key parameters of atomization, including droplet size, injection angle and velocity were also analyzed. The study revealed that the nanoparticle processing in SPS preferred small droplets with better atomization and less aggregation from suspension preparation. The injection angle and velocity influenced the nanoparticle release percentage. Small angle and low initial velocity might have more nanoparticles released. Besides, the melting percentage of nanoparticles and agglomerates were studied, and the critical droplet diameter to ensure solid melting was drawn. Results showed that most released nanoparticles were well melted, but the agglomerates might be totally melted, partially melted, or even not melted at all, mainly depending on the agglomerate size. For better coating quality, the suspension droplet size should be limited to a critical droplet diameter, which was inversely proportional to the cubic root of weight content, for given critical agglomerate diameter of being totally melted.

Dispersion and Stability of Nanometer Particles in Plating Bath

Research on dispersion characteristics of micron grade Al_2O_3 particle in water phase

Synthesis and Comparative Study on Dispersion Stability of Binary Suspensions of Mixed and Composite Nanoparticles

Improved Dispersion Stability of Water-Based Tio2 Nanofluids Through Combined Effects of Nanoparticle Mixing and Dispersant Addition

Stability of TiO 2 Nanoparticles in Deionized Water with ZrP Nanoplatelets

Effect of Nanoplatelet Size on the Colloidal Stability of Coupled Nanocomposite of TiO2 and Zirconium Phosphate Nanoplatelets

Increasing Entropy for Colloidal Stabilization

Dispersion Stability of Tio2-H2o Nanofluids Containing Mixed Nanotubes and Nanosheets

Carbon Nanotube Nanofluid's Stability with Uniform Design Method

Improving the Stability of Tio2 Aqueous Suspensions by Coupling Tio2 Nanoparticles on Zrp Nanoplatelets

Stability of Nano-particle Suspensions

Dispersion Stability Analysis of α-Fe2O3-Water-Based Nanofluid

Study on Dispersion Behavior and Thermal Conductivity of Cu-H2O Nanofluids

Experimental Study for the Stability Factors of Al2O3nano-fluids with Uniform Design

Dispersant Selection for Nanomaterials: Insight into Dispersing Functionalized Carbon Nanotubes by Small Polar Aromatic Organic Molecules

Particle size control and the interactions between drug and stabilizers in an amorphous nanosuspension system

Effects of Atomization Injection on Nanoparticle Processing in Suspension Plasma Spray

Influence Factors on Suspension Stability of Nanofluids

Dispersion Property of Hexagonal BN Particles in Different Surfactant Plating Solution

Preparation and Characterization of Stable Dispersive Colloidal Silver Nanoparticles

Stability evolution of ultrafine Ag nanoparticles prepared by laser ablation in liquids