Uncertainty Analysis of Photovoltaic Cells to Determine Probability of Functional Failure
Feng Zhang,Xinhe Wang,Weiyue Wang,Jiajia Zhang,Ruijie Du,Bingqiang Li,Wei Liu
DOI: https://doi.org/10.1016/j.apenergy.2022.120495
IF: 11.2
2023-01-01
Applied Energy
Abstract:In engineering practice, extensive uncertainties exist in photovoltaic (PV) cell material parameters owing to manufacturing process errors and in PV cell working environment parameters owing to environmental uncertainties. Ignoring the uncertainty of these parameters will greatly reduce the reliability of photovoltaic cells. In this study, a PV cell model was used to conduct an uncertainty analysis based on functional failure. Functional failure is defined as output power fluctuation beyond the specified range, and functional safety region is defined as the allowable fluctuation range of output power during operation. A global sensitivity analysis method based on the Monte Carlo method was employed to study the influence of parameter fluctuation on the functional failure probability of a PV cell. An uncertainty analysis method based on Latin hypercube sampling was applied to study the influence of parameters on the probability of PV cell operation in the functional safety domain. The results indicate that the uncertainty of surface temperature had the most significant influence on the failure probability, followed by the ideality factor, radiation intensity, and current temperature coefficient, the series and parallel resistances had the smallest impact. Optimal values of 510.200 W/m2, 284.600 K, and 1.446 were obtained for radiation intensity, surface temperature, and ideality factor, respectively, which ensured that system functional failure probability remained in the safety zone with values of 93.763 %, 99.211 %, and 98.856 %, respectively. Additionally, the lower series resistance and the higher parallel resistance, the more likely the system to operate in the functional safety domain. The results of study expand the evaluation standard for PV cell operation and ensure the desired system output power.