Abstract:As a damage element, high-speed fragments have a significant effect on the ammunition safety. The impact from the fragments are also one of the basic problems of ammunition safety tests. To clarify the reaction characteristics of combustion, explosion, detonation, and so on, when hypersonic fragments hit insensitive munitions, it is necessary to carry out corresponding research on the deceleration law of hypersonic fragment in the air. In this paper, a 30 mm caliber gun with large chamber, small caliber, and large aspect ratio is proposed to drive high-speed fragments. According to STANAG 4496 standard, a near-cylinder steel fragment with Brinell hardness HB ≤ 270 and mass of 18.6 g was designed. The test system was composed of zone interception velocity measurement, chamber pressure sensor, trajectory tracking system, high-speed camera, and other equipment were also established to obtain the pressure variations in the chamber, the velocity of the fragment, and its flight orientation. From the video taken by the high-speed camera and trajectory tracking system, the fragment and the projectile sabot achieve effective separation after the fragment travels out of the muzzle. As time goes on, the distance between the fragment and the projectile sabot gradually increases. The fragment is always in the front of the sabot and steadily flies to the target. The muzzle velocity of the fragment is controlled by adjusting the propellant charge, and the flight velocity in the air is measured by the zone interception velocity measuring device in the range of 5 Ma to 7 Ma. The theoretical models of fragment deceleration and the models of flight orientation are also established according to the experimental data. On this basis, F test and least square nonlinear regression fitting were used to analyze experimental data. Finally, the deceleration coefficient of quasi-cylindrical fragments between 5 Ma and 7 Ma stipulated in STANAG 4496 standard is 0.009312, and the average drag coefficient in air is 1.109.

SIMULATION OF FRAGMENTATION PROCESS OF PROPELLANT BED UNDER IMPACT LOAD

Numerical simulation of the disk fragment impacting resistance of plate target

TWO TYPES OF CRACKS ON CAVITY SURFACE OF HIGH-LOADED SOLID PROPELLANT GRAIN

Simulation of Fragmentation with Material Point Method Based on Gurson Model and Random Failure

Computational Technique for Crack Propagation Simulation in Viscoelastic Solid Propellant

Experimental research on CMDB propellant fracture under impact load

Fracture Analysis of Propellant Grain under an Internal Pressure Based on Extended Finite Element Method

Simulative Analysis and Experimental Test of Composite Fragile Projectile Under Impact Dynamics

Factors influence propagation of debond in burning propellant

Theoretical and Numerical Study on Dynamic Response of Propellant Actuator

Fracture Behavior Investigation of the Propellant Material Using the Extended Finite Element Method

Simulation Analysis of the Safety of High-Energy Hydroxyl-Terminated Polybutadiene (HTPB) Engine under the Impact of Fragments

Fragment Dispersion Characteristics of Uncoupled Charge Structures with Internal Explosive Loading

Simulation and Study on the Fragment Ejection Process of Premade D-shape Warhead

Experimental Study on Motion Law of the Fragment at Hypersonic Speed

Multiscale Modeling of Heterogeneous Propellants from Particle Packing to Grain Failure Using a Surface-Based Cohesive Approach

Investigation of the Fracture and Fragmentation of Implosively Driven Thin-Walled Cylindrical Shell: From Thermodynamic Analysis to CDEM Simulation

Simulation of Spall Fracture Based on Material Point Method

The Mesoscopic Numerical Simulation of GAP/CL20/AP Composite Solid Propellant Based on MPM and FEM

Simulation of interior ballistic two-phase flow of storage propellant charge

Simulation of Fragmentation Characteristics of Projectile Jacket Made of Tungsten Alloy after Penetrating Metal Target Plate Using SPH Method