Abstract:In a context of growing concern for vehicle-related CO2 and pollutant emissions, non-conventional fuels like methanol (CH3OH) represent a valid alternative to fossil fuels to decarbonize the transport sector in a reasonable time. This is mainly due to its lower carbon content than conventional gasoline and diesel. Moreover, methanol can be obtained either from biomass or CO2 capture from the atmosphere, which makes the latter a renewable fuel. Given the possibility of being stored in liquid phase at standard temperature and pressure (STP), methanol is very suitable for Light Duty Vehicles (LDVs), in which the need to contain fuel tank dimensions is relevant. Regarding the deployment of methanol as a fuel, it is not very challenging, as it can be adopted in current production Internal Combustion Engines (ICEs) either in pure form or in blend with other fuels without any significant modifications.Within this context, the present work aims to assess, in both experimental and simulation environments, the benefits of pure methanol fueling of Spark Ignition (SI) engines. Particularly, a small single-cylinder production SI engine has been tested on the engine test bench at different speeds and air-fuel ratios, at unthrottled conditions. Besides the test campaign, a 1-D model of the engine under study has been developed, with a particular focus on the simulation of methanol combustion. Particularly, different correlations for the laminar flame speed, implemented in the combustion model, have been investigated to evaluate their effect on the prediction of performance, efficiency, and pollutant emissions. Combustion, heat transfer, and pollutant emissions sub-models have been tuned and validated based on the experimental data. Both experimental measurements and simulation results evidence that methanol fueling allows for improving engine efficiency, while reducing regulated pollutant emissions from a current production SI engine, if compared to conventional gasoline, especially under lean-burn operating conditions. This work is useful for future activities, which will concern the optimization of the Ignition Timing (IT), as well as the investigation of the knock tendency of methanol-fueled SI engines.

Emission Modeling and Prediction of Low Proportion Methanol-gasoline Engine

Engine Performance and Emissions of A Compression Ignition Engine Operating on the Diesel-Methanol Blends

Combustion and Emission Characteristics of a DI Diesel Engine Fueled by Diesel-Methanol Blends

Investigation of the Mechanism Behind the Surge in Nitrogen Dioxide Emissions in Engines Transitioning from Pure Diesel Operation to Methanol/diesel Dual-Fuel Operation

A Detailed Oxidation Mechanism For The Prediction Of Formaldehyde Emission From Methanol-Gasoline Si Engines

Experimental Investigation of Unregulated Emissions Using Low-Percent Methanol-Gasoline Blend Fuels

A Reduced Combustion Kinetic Model for the Methanol-Gasoline Blended Fuels on SI Engines

Measurementsof Unregulated Emissions from a Methanol-Gasoline Blend Vehicle Using Different Methods

Experimental Investigation on the Emissions of a Port Fuel Injection Spark Ignition Engine Fueled with Methanol–Gasoline Blends

Experimental Investigation of Cold-Start Unregulated Emissions and Combustion Characteristics of Low-Percent Methanol-Gasoline Engine

Modeling and Experimental Validation of a Pure Methanol-Fueled Small SI Engine: Impact of the Laminar Flame Speed Correlation

Research on unregulated emissions from an alcohols-gasoline blend vehicle using FTIR, HPLC and GC-MS measuring methods

Unregulated Emissions and Combustion Characteristics of Low-Content Methanol−Gasoline Blended Fuels

Diesel Engine Emissions Simulation and Test in Working Process

Effects of ambient methanol on pollutants formation in dual-fuel spray combustion at varying ambient temperatures: A large-eddy simulation

Numerical Investigation of the Fuel/Air Ratio Sensor Sensitivity in a Port-Fuel-Injected Spark-Ignition Engine Equipped with Three-Way Catalysts

Simulation study on in-cylinder combustion and pollutant generation characteristics of PODE/methanol blends

Numerical Investigation of the Effect of Ammonia Addition on the Performance of a Stoichiometric Operated Natural Gas Spark Ignition Engine

An Artificial Neural Network Model to Predict Efficiency and Emissions of a Gasoline Engine

Skeletal CH 3 OH/NO x Kinetic Model for Simulating Spark-Ignition and Turbulent Jet Ignition Engines

Simulation Study on the Impact of Injection Strategies on the Performance of Methanol–Gasoline Dual-Fuel Engines