Abstract:Due to obvious advantages, such as light weight, easy folding and deployment and high accuracy of optical imaging, the membrane diffraction large space telescope has currently been one of the hot research topics. Because of the influence of external disturbance and attitude adjustment, the large space telescope will occur a certain degree of vibration inevitably, affecting the imaging accuracy of the space telescope for Earth. Thus, to satisfy the requirement of imaging accuracy, it is necessary for the space telescope to adopt appropriate vibration control methods. In this paper, the active vibration control of the large space telescope is studied using cables as active actuators. Considering that cables can work under tension but not under pression and the tensile capacity is limited, the unilateral and saturated characteristics of cable actuators are taken into account during control design in this paper. Firstly, the dynamic model of the membrane diffraction space telescope is established using the finite element method (FEM). Secondly, in combination with the linear quadratic regulator (LQR) and the bang-bang regulator, a piecewise cost function is used to design the active vibration control law. Next, the controllability criterion and the genetic algorithm (GA) are adopted to determine the optimal positions of cable actuators. Finally, the validity of the proposed control method is verified by numerical simulations. Simulation results indicate that the vibration of the space telescope can be suppressed effectively using the proposed control method, and the imaging requirements of the telescope may be realized using the least cable actuators, whose minimum quantity and position distribution are determined in this paper.

Analysis and control of the cable-supporting system including actuator dynamics

Modeling and Control of the Feed Cable-Supporting System for Large Spherical Radio Telescope

Stochastic Optimal Control of Cable Vibration in Plane by Using Axial Support Motion

Dynamic analysis and tracking control of the cable-suspended system for the five-hundred-meter aperture spherical telescope

Dynamic Analysis and Control for Cable-supported Flexible Structure

Nonlinear Pd Control of A Long-Span Cable-Supporting Manipulator in Quasi-Static Motion

On Control System of the Cable-Supporting Parallel Mechanism Including Actuator Dynamics

Active and Semi-Active Control for the Unstable Vibration of an Inclined Taut Cable

Stability Analysis of a Semi-active Controlled Stay Cable

Dynamic Modeling and Disturbance-rejection Control of 6-DOF Cable Driven Parallel Manipulator

Optimization of Cable Tensions of a Cable-Driven Parallel Manipulator for a Large Radio Telescope

Optimal Control Analysis of Self-excited Oscillation of an Inclined Taut Cable under Wind Loading

Active Vibration Control of a Large Space Telescope Based On H∞ Control With Unilateral and Constrained Input

Active Vibration Control of a Large Space Telescope Truss Based on Unilateral Saturated Cable Actuators

Optimal Bounded Semi-continuous Control of Nonlinear Random Vibration of Taut Cables

Development of a Large Parallel‐cable Manipulator for the Feed‐supporting System of a Next‐generation Large Radio Telescope

Analysis and a Simplified Model of the Cable of a Large-Scale Flexible Parallel Manipulator for a Large Radio Telescope

Vibration Control of the Suspended Feed Cabin Structure of the large Radio Telescope

Tracking Control Method for a Cable-Supported Flexible Structure

Dynamic Analysis and Vibration Attenuation of Cable-Driven Parallel Manipulators for Large Workspace Applications

Stady on Control Methodology of Feed Cabin Supporting Structure with Flixible Cable