Abstract:Hierarchical twin lamellae in polycrystalline face-centered cubic (fcc) metals possess a possibility to achieve higher strength with keeping an acceptable elongation. The present work is concerned with the analysis of twin spacing and grain size-dependent plastic performance in hierarchically nanotwinned fcc metals using a generalized strain-gradient plasticity model. The dislocation density-based physical model for constitutive description of nanotwinned fcc metals is expanded for the hierarchical structures of nanotwins. The strengthening mechanism and the failure behavior in these hierarchical nanostructures are studied to evaluate the strength and ductility. Moreover, the transition twin spacing between the strengthening and softening is obtained in different order of twin lamellae. A dislocation-based model on nucleating deformation twins is presented to predict the critical twin spacing in the lowest twin lamellae for generating the subordinate twin lamellae. Our simulation results demonstrate that the existence of the hierarchical nanotwins gives rise to a significant enhancement in the strength, and the resulting global flow stresses are sensitive to the twin spacings of the hierarchical twin lamellae and the grain size. Two softening stages are observed with variation of twin spacing, and the relevant transition twin spacing depends on the microstructural size in hierarchically nanotwinned metals. We further find that the predicted failure strain decreases with decreasing the twin spacing, which is quite different from the case of the individually nanotwinned fcc metals. The critical twin spacing for generating subordinate twins also depends on the twin spacing of superordinate twin lamellae and the grain size. These findings suggest that the high yield strength and good ductility can be achieved by optimizing the grain size and the twin spacings in the hierarchical twins.

Features of Highly Twinned Microstructures Produced by GBE in FCC Materials

Unstable Twin In Body-Centered Cubic Tungsten Nanocrystals

Discrete Twinning Dynamics and Size-Dependent Dislocation-to Twin Transition in Body-Centred Cubic Tungsten

The BCC-FCC Phase Transformation Pathways and Crystal Orientation Relationships in Dual Phase Materials From Al-(Co)-Cr-Fe-Ni Alloys

Grain orientation statistics of grain-clusters and the propensity of multiple-twinning during grain boundary engineering

A Review on Controlling Grain Boundary Character Distribution during Twinning-Related Grain Boundary Engineering of Face-Centered Cubic Materials

A combined EBSD and machine learning study of predicting deformation twinning in BCC Fe 81 Ga 19 alloy

An alternative formation mechanism of {332}BCC twinning in metastable body-centered-cubic high entropy alloy

In Situ Study of the Microstructural Evolution of Nickel-Based Superalloys with High Proportional Twin Boundaries Obtained by High-Temperature Annealing

Twin-twin Geometric Structure Effect on the Twinning Behavior of an Mg-4Y-3Nd-2Sm-0.5Zr Alloy Traced by Quasi-in-situ EBSD

High stress twinning in a compositionally complex steel of very high stacking fault energy

Twins and twin-related domains in a grain boundary-engineered 304 stainless steel

Three-dimensional study of grain scale tensile twinning activity in Mg: A combination of microstructure characterization and mechanical modeling

Phase transformation induced transitional twin boundary in body-centered cubic metals

Stabilizing defective coherent twin boundaries for strong and stable nanocrystalline nanotwinned Cu

Hierarchical Microstructure Design of a Bimodal Grained Twinning-Induced Plasticity Steel with Excellent Cryogenic Mechanical Properties

Analysis of the Twin Spacing and Grain Size Effects on Mechanical Properties in Hierarchically Nanotwinned Face-Centered Cubic Metals Based on A Mechanism-Based Plasticity Model

Microtwinning mechanism revealed by its orientation dependence and tension-compression asymmetry in γ′ precipitate-strengthened Ni-based superalloys

Structure characterization of special boundaries in Fe47Mn30Co10Cr10B3 dual-phase high-entropy alloy

Twin-Related Grain Boundary Engineering and Its Influence on Mechanical Properties of Face-Centered Cubic Metals: A Review