Abstract:This study developed a comprehensive model that integrated fluid finite element computational mechanics, powder discrete element dynamics, and molten pool heat and mass transfer. The model accurately described the various phenomena occurring during the laser cladding process. This model, known as the multi-angle powder–gas–laser–liquid multiphase coupling model, extensively elucidated powder–gas transport, laser energy distribution, and heat and mass transfer within the molten pool. Additionally, the model comprehensively simulated the entire process of powder flow, from the nozzle to the formation of the cladding, even under varying substrate inclinations at different angles. Additionally, the study investigated the influence of substrate deflection angles, laser power, and scanning speed on the morphology of the cladding layer. The results revealed that as the substrate deflection angle varied from 0° to 150°, the height of the cladding layer first decreased and then increased, reaching a minimum value of 0.34 mm at 90°. Similarly, at a deflection angle of 90°, the width and offset of the layer first increased and then decreased, reaching peak values at 2.96 mm and 116 μm, respectively. However, the depth of the cladding layer displayed minimal variations, with an initial decrease followed by an increase. Moreover, as the laser power increased from 900 to 1500 W, the height, width, depth, and offset of the cladding layer gradually increased. Conversely, as the scanning speed increased from 5 to 11 mm/s, the dimensions of the layer gradually decreased. These findings address current challenges in numerical simulations, such as discontinuity and staging issues. Moreover, the findings provide valuable theoretical guidance for selecting and optimizing process parameters in multi-angle laser cladding, thereby filling a crucial knowledge gap.

Laser Cladding Forming of a Ramp Thin Wall with Variable Powder Feed Rate

Laser Cladding of a Ramp Thin Wall with a Variable

Adjustment of Accumulation Process for Thin-wall Part by Laser Cladding Rapid Forming

Study on the Powder Feeding Technique during Laser Micro Cladding Deposition Manufacturing of TC4 Powder

The Influences of Processing Parameters on Forming Characterizations During Laser Rapid Forming

Investigating the Effects of Powder Feeding Rate on Microstructure Transformation in Linear Laser Beam Additive Manufactured Thick-Walled Structures

Temperature Field Simulation and Experimental Analysis of Laser Cladding 45 Steel.

Optimization of Laser Cladding Forming Parameters by Numerical Simulation to Minimize the Cracking Posibilitys

Influence of Process Parameters on Flatness During Single-Track Laser Cladding

Study on the Deformation Control and Microstructures of Thin-Walled Parts Repaired by Laser Cladding

Modeling for evaluating the effect of powder flow during laser cladding process: From thermal and flow fields to microstructure of the molten pool

Laser Metal Deposition with Spatial Variable Orientation Based on Hollow-Laser Beam with Internal Powder Feeding Technology

Optimization of powder catchment efficiency for industrial laser cladding processes

The Forming Control Method of Multi-Track Laser Cladding on Curved Surface

Surface Evenness Control of Laser Solid Formed Thin-Walled Parts Based on the Mathematical Model of the Single Cladding Layer Thickness

Numerical simulation of the three-dimensional temperature field in laser cladding forming process

Laser direct metal deposition of variable width thin-walled structures in Inconel 718 alloy by coaxial powder feeding

Influence of Powder Flow on Sidewall Quality of Solid Parts in Laser Metal Direct Forming

The Effect of Scanning Strategies on FeCrAl Nuclear Thin-Wall Cladding Manufacturing Accuracy by Laser Powder Bed Fusion

A multi-angle numerical model for laser cladding from the nozzle to cladding formation

Prediction and Verification of the Single Cladding Layer Thickness for Laser Solid Forming