Liquefaction resistance and small strain stiffness of silty sand: Effects of host sand gradation and fines content
Xiaoqiang Gu,Kangle Zuo,Chao Hu,Jing Hu
DOI: https://doi.org/10.1016/j.enggeo.2024.107546
IF: 6.902
2024-05-12
Engineering Geology
Abstract:In this paper, a well designed experimental study comprising undrained cyclic triaxial and bender element tests was carried out on five sand-silt mixtures with three grain size ratios ( R d ) and three sand uniformity coefficients ( C us ). The results reveal that at given fines content (FC) and void ratio, the liquefaction resistance (CRR) of the mixtures decreases as R d increases from 9.7 to 27.8 or C us from 1.50 to 4.46, and the CRR of the mixture at the highest R d or C us becomes as low as nearly 50% of that at the lowest R d or C us . The equivalent relative density ( D r *) based on the binary packing theory can be utilized to capture the coupled effects of host sand gradation and FC on the CRR of sand-silt mixtures. A novel finding is that a universal relationship exists between the liquefaction resistance and the shear modulus normalized by the minimum void ratio function of host sand ( G N ') for different FCs, initial effective confining pressures, sample preparation methods (SPMs), and host sand gradations. Based on the comprehensive laboratory test data, the empirical CRR 15 - G N ' correlation is proposed and further adjusted for the field liquefaction triggering analysis based on the shear wave velocity (V s ). Soil can be considered non-liquefiable when its equivalent shear wave velocity exceeds 225 m/s or the applied cyclic stress ratio (CSR) is below 0.088. Comparisons with the previously established liquefaction triggering boundary curves validate the applicability of the proposed curve for initial evaluation of the liquefaction resistance of sandy soils, indicating laboratory studies can complement in-situ investigations for V s -based liquefaction assessment.
geosciences, multidisciplinary,engineering, geological