Abstract:The effect of water management on oxygen transport plays a critical role in the design of high-performance polymer electrolyte fuel cells (PEFCs) for the automotive industry, especially at low cathode platinum loading [1,2]. In this regard, optimizing the hierarchical pore structure of the membrane electrode assembly (MEA) is crucial to alleviate cathode flooding while ensuring good membrane hydration [3]. However, this task is complicated due to the small dimensions involved in the problem. Mathematical modeling has turned out to be a key tool to understand transport in the thin layered assembly used in PEFCs, including the catalyst layer (CL), microporous layer (MPL) and gas diffusion layer (GDL). In this work, oxygen, heat and two-phase water transport in the MEA are examined by means of a 1-dimension continuum bundle of capillary tubes model. Experimental pore size distributions (PSDs) are considered for the GDL/MPL/CL assembly. The model takes especial care in analyzing thermal and water behavior in catalyst layer by considering micro ( 300 nm) structures as different interconnected domains, each with their own effective thermal conductivity and water saturation. In this aspect, taking into account pore hydrophilicity or hydrophobicity is determinant as water behavior is extremely different. The model predictions are validated against previous experimental data for various operating conditions and pore structures (Figure 1a). The results offer precise information on the coupling between heat and water transport in both liquid and gas phases, and the impact of operating conditions and transport properties on the saturation distribution through the MEA layers (Figure 1b). Then the continuum bundle of capillary tubes model is also used to run a parametric analysis centered on the obtention of optimal PSD-dependent effective transport properties to produce improved MEA microstructures. [1] A. Sánchez-Ramos, J.T. Gostick, P.A. García-Salaberri, Modeling the Effect of Low Pt loading Cathode Catalyst Layer in Polymer Electrolyte Fuel Cells: Part I. Model Formulation and Validation, Journal of the Electrochemical Society 168 (2021) 124514. [2] A. Sánchez-Ramos, J.T. Gostick, P.A. García-Salaberri, Modeling the Effect of Low Pt loading Cathode Catalyst Layer in Polymer Electrolyte Fuel Cells: Part II. Parametric Analysis, Journal of the Electrochemical Society 169 (2022) 074503. [3] M. Gomaa, A. Sánchez-Ramos, N. Ureña, M.T. Pérez-Prior, B. Levenfeld, P.A. García-Salaberri, M. Rabeh, Characterization and modelling of free volume and ionic conduction in copolymer proton exchange membranes, Polymers 14(9) (2022) 1688. Figure 1

Effect of structure on porous gas-diffusion electrodes for phosphoric acid fuel cells

Reshaping the Cathodic Catalyst Layer for Anion Exchange Membrane Fuel Cells: from Heterogeneous Catalysis to Homogeneous Catalysis

Construction of Homogeneous Catalyst Layers at Proton Exchange Membrane Fuel Cell Cathodes

Mitigating Phosphate Anion Poisoning of Cathodic Pt/C Catalysts in Phosphoric Acid Fuel Cells

Influence of PTFE Dispersion in the Catalyst Layer of Porous Gas-Diffusion Electrodes for Phosphoric Acid Fuel Cells

A pore scale model study of mass transfer and electrochemical reaction in cathode catalytic layer of high-temperature polymer electrolyte membrane fuel cells

(Digital Presentation) Modeling the Effect of Membrane Electrode Assembly Microstructure on Thermal and Water Transport in Polymer Electrolyte Fuel Cells

Pore-scale modeling of oxygen transport in the catalyst layer of air-breathing cathode in membraneless microfluidic fuel cells

The Formation–Structure–Functionality Relationship of Catalyst Layers in Proton Exchange Membrane Fuel Cells

Heat and mass transfer at the interface between cathode catalyst layer and gas diffusion layer of a proton exchange membrane fuel cell

Effects of agglomerate structure and operating humidity on the catalyst layer performance of PEM fuel cells

Analysis of Mass Transfer and Porosity at Catalyst Layer of Polymer Electrolyte Membrane Fuel Cell Based on A Pore-Scale Model

Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells

Pore-scale modeling of mass transport in the air-breathing cathode of membraneless microfluidic fuel cells

Porosimetry of Meas Made by "thin Film Decal" Method and Its Effect on Performance of Pefcs

Optimizing catalyst layer structure design for improved water management of anion exchange membrane fuel cells

Probing Multiphase Reactive Transport Interactions in the Polymer Electrolyte Fuel Cell Catalyst Layer Degradation

Balancing proton and mass transfers in cathode catalyst layer of high-temperature proton exchange membrane fuel cell via gradient porous structure design

Pore-scale study of effects of cathode catalytic layer component gradient distribution and perforation on reaction transport processes

Heterogeneous electrocatalysis in porous cathodes of solid oxide fuel cells

Nanoscale study of reactive transport in catalyst layer of proton exchange membrane fuel cells with precious and non-precious catalysts using lattice Boltzmann method