Abstract:This work proposes and experimentally demonstrates a high-performance polarization space parity-time (PT) symmetric fiber ring laser to achieve a low-noise, narrow-linewidth, and highly stable single-longitudinal-mode output. The gain/loss and coupling coefficients are regulated by adjusting a polarization controller (PC) and the pumping current of an erbium-doped fiber amplifier (EDFA) within the ring cavity. The results show that the single longitudinal mode oscillation of the laser can be implemented by PT symmetry breaking. The frequency noise spectral density and the linewidth characteristics of the laser are evaluated by the short-delay self-heterodyne method. The results reveal that excellent low-frequency noise (181 Hz2/Hz at a 10 kHz offset frequency) and narrow fundamental linewidth (68 Hz) can be achieved. Additionally, the laser exhibits outstanding stability with only 0.64 pm wavelength drift over 30 min. By tuning an optical tunable filter (OTF), the wavelength tunable range of the laser can cover the entire C-band. Furthermore, the impacts of different fiber length on the frequency noise spectral density and the filter bandwidth on stability are analyzed, offering guidance for component selection in such laser systems.

Stable Single-Mode Operation of a Narrow-Linewidth, Linearly Polarized, Erbium-Fiber Ring Laser Using a Saturable Absorber

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

High-Performance Fiber Ring Laser Based on Polarization Space Parity-Time Symmetry Breaking

A Widely Tunable Single-Longitudinal-mode Ytterbium-Doped Fiber Laser Based on Fiber Lyot Filter

All Polarization Maintaining Brillouin Erbium-Doped Fiber Laser With Sub-kHz Linewidth Using Saturated Absorber and Self-Injection Feedback

Narrow-linewidth Single-Polarization Fiber Laser Using Non-Polarization Optics.

115-Mhz Linear NPE Fiber Laser Using All Polarization-Maintaining Fibers

1015-1080 Nm Tunable Polarization-Maintaining Dissipative Soliton Mode-Locked Fiber Laser

Stable single-mode compound-ring erbium-doped fiber laser

Topological insulator: Bi2Se3/polyvinyl alcohol film-assisted multi-wavelength ultrafast erbium-doped fiber laser

All-polarization-maintaining, semiconductor saturable absorbing mirror mode-locked femtosecond Er-doped fiber laser with a gigahertz fundamental repetition rate

Environment-stable sub-100 fs Er: fiber laser with a 3 dB bandwidth of 78 nm

Low-repetition-rate, all-polarization-maintaining Yb-doped fiber laser mode-locked by a semiconductor saturable absorber

All-Polarization-Maintaining Linear Cavity Fiber Lasers Mode-Locked by Nonlinear Polarization Evolution in Stretched Pulse Regime

L-Band Erbium-Doped Fiber Laser with Polarization-Maintaining Ring Cavity

All-polarization-maintaining linear fiber laser mode-locked by nonlinear polarization evolution with phase bias

Narrow-linewidth high-efficiency single-frequency ytterbium-doped fiber laser with highly linear polarization at 1064 nm

Optically controlled tunable ultra-narrow linewidth fiber laser with Rayleigh backscattering and saturable absorption ring

An All-Polarization-Maintaining Repetition-Tunable Erbium-Doped Passively Mode-Locked Fiber Laser

Environmentally stable Er-fiber mode-locked pulse generation and amplification by spectrally filtered and phase-biased nonlinear amplifying long-loop mirror

Low-repetition-rate, high pulse energy all-polarization-maintaining Er-doped fiber laser mode-locked with a nonlinear amplifying loop mirror