Abstract:To effectively solve the problem of wastewater pollution, in this paper, corn starch, 3-chloro-2-hydroxypropyl trimethylammonium chloride (CTA), vinyl acetate (VAC), and methylacryloxyethyltrimethylammonium chloride (DMC) were used as raw material, etherifying agent, esterifying agent, and grafting monomer, respectively. A starch (St)-based natural polymer cationic flocculant (DMSt-g-DMC) was prepared via etherification, esterification, and grafting copolymerization triple modification. This study is of great significance for the removal of dyes from wastewater. There are two keys to success. First, DMSt-g-DMC not only enhances flocculation but also improves water solubility through triple modification. Second is grafting reaction, in which the number of positive charges in the main chain of the DMSt-g-DMC macromolecule is further increased and its molecular structure adjusted to give full play to its electrical neutralization, bridging, and net trapping effects on anionic dyes in the water, so as to achieve the purpose of improving the flocculation effect. The removal rates of DMSt-g-DMC were 94.1% for Acid Light Yellow G, 83.7% for Reactive Brilliant Blue X-BR, and 97.1% for Direct Lake Blue 5B. DMSt-g-DMC not only has a wide flocculation window but also maintains good flocculation performance in a wide pH range, which is conducive to the treatment of wastewater with high alkalinity and complex composition. Finally, the removal rate of dye was tested when DMSt-g-DMC and PAC were flocculated together; the dosages of DMSt-g-DMC and PAC were 70 and 100 mg/L, respectively. The removal rates of Disperse Red GS, Disperse Yellow 2G-FL, and Direct Lake Blue 5B reached 87.5, 89.8, and 95.6%, respectively. In addition, DMSt-g-DMC and PAC remained stable after a long flocculation time, which may bring far-reaching changes if applied in industrial wastewater treatment.

Decolorization of Dyeing Wwastewater by Using Cationic Polymer BT-03 and Pdmdaac as Flocculants

The Investigation of the Treatment of Dyeing Wastewater by Galvanic Corrosion-Reduction Degradation-Coagulation Absorption

Study on the coagulation treatment of activated dye wastewater

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

Study on Advanced Treatment of Dyeing Wastewater by Fenton Oxidation

DECOLORIZATION PROPERTY OF PDMDAAC FLOCCULANT SERIES

Enhanced performance of a novel flocculant containing rich fluorine groups in refractory dyeing wastewater treatment: Removal mechanisms

Preparation of Starch-Based Cationic Flocculants and Its Study on the Removal of Textile Dyes

Flocculation behaviors of a novel papermaking sludge-based flocculant in practical printing and dyeing wastewater treatment

Synthesis of strongly cationic hydrophobic polyquaternium flocculants to enhance removal of water-soluble dyes in wastewater

Flocculation performance evaluation and flocculation mechanism study of PAC/PMAPTAC composite flocculant in dyeing wastewater

Study on the pretreatment of printing & dyeing wastewater with composite polyaluminum ferric flocculants

Treatment of Dyeing Wastewater by Polyacrylamide/Diatomite Composite

Advanced Treatment of Actual Textile Dye Wastewater by Fenton‐flocculation Process

Efficient Removal of Cationic Dyes by a Bivanadyl Capped, Highly Reduced Keggin Polyoxometalate Through Flocculation

Synthesis and characterization of cyclodextrin-based acrylamide polymer flocculant for adsorbing water-soluble dyes in dye wastewater

Preparation of inorganic-organic composite coagulants PAFC-PDA and its effects on treating synthetic printing and dyeing wastewater

Treating Dye Wastewater of Reactive Brilliant Red K-2bp by Cetyltrimethylammonium Chloride-Modified Bentonite with Polyacrylamide Flocculant

Evaluation of Starch-Based Flocculants for the Flocculation of Dissolved Organic Matter from Textile Dyeing Secondary Wastewater.

Experimental Study on Treatment of Dyeing Wastewater by Activated Carbon Adsorption, Coagulation and Fenton Oxidation

Decolorization and COD removal of secondary yeast wastewater effluents by coagulation using aluminum sulfate