Abstract:Statement of problem: Veneering with porcelain may adversely affect the marginal fit of long-span computer-aided design and computer-aided manufacturing (CAD-CAM) implant-supported fixed prostheses. Moreover, data regarding the precision of fit of CAD-CAM-fabricated implant-supported complete zirconia fixed dental prostheses (FDPs) before and after porcelain layering are limited. Purpose: The purpose of this in vitro study was to evaluate the effect of porcelain layering on the marginal fit of CAD-CAM-fabricated complete-arch implant-supported, screw-retained FDPs with presintered zirconia frameworks compared with titanium. Material and methods: An autopolymerizing acrylic resin-fixed complete denture framework prototype was fabricated on an edentulous typodont master model (all-on-4 concept; Nobel Biocare) with 2 straight in the anterior and 2 distally tilted internal-hexagon dental implants in the posterior with multiunit abutments bilaterally in canine and first molar locations. A 3-dimensional (3D) laser scanner (S600 ARTI; Zirkonzahn) was used to digitize the prototype and the master model by using scan bodies to generate a virtual 3D CAD framework. Five presintered zirconia (ICE Zirkon Translucent - 95H16; Zirkonzahn) and 5 titanium (Titan 5 - 95H14; Zirkonzahn) frameworks were fabricated using the CAM milling unit (M1 Wet Heavy Metal Milling Unit; Zirkonzahn).The 1-screw test was applied by fixing the frameworks at the location of the maxillary left first molar abutment, and an industrial computed tomography (CT) scanner (XT H 225 - Basic Configuration; Nikon) was used to scan the framework-model complex to evaluate the passive fit of the frameworks on the master model. The scanned data were transported in standard tessellation language (STL) from Volume Graphics analysis software to PolyWorks analysis software by using the maximum-fit algorithm to fit scanned planes in order to mimic the mating surfaces in the best way. 3D virtual assessment of the marginal fit was performed at the abutment-framework interface at the maxillary right canine (gap 3) and right first molar (gap 4) abutments without prosthetic screws. The facial or buccal aspects of the teeth on frameworks were layered with corresponding porcelain (Initial Dental Ceramic System; GC) and CT-scanned again using the same protocol. Marginal fit measurements were made for 4 groups: titanium (Ti) (control), porcelain-layered titanium (Ti-P) (control), zirconia (Zir), and porcelain-layered zirconia (Zir-P). 3D discrepancy mean values were computed and calculated, and the results were analyzed with a repeated measures 3-way ANOVA using the maximum likelihood estimation method and Bonferroni adjustments for selected pairwise comparison t-tests (α=.05). Results: The 3D fit was measured at gap 3 and gap 4. Statistically significant differences in mean 3D discrepancies were observed between Zir-P (175 μm) and Zir (89 μm) and between Zir-P and Ti-P (71 μm) (P<.001). Conclusions: Porcelain layering had a significant effect on the marginal fit of CAD-CAM-fabricated complete-arch implant-supported, screw-retained FDPs with partially sintered zirconia frameworks. 3D marginal discrepancy mean values for all groups were within clinically acceptable limits (<120 μm), except for the layered zirconia framework.

The effect of veneer on the marginal fit of the copings using different materials

Esthetic evaluation of Cerec 3D anterior ceramic veneers

Comparative research on fit of commercial pure titanium copings of different thickness

Comparison of the Marginal and Internal Fit of Ceramic Laminate Veneers Fabricated with Four Different Computer-Aided Manufacturing Techniques

Effect of porcelain firing and cementation on the marginal fit of implant-supported metal-ceramic restorations fabricated by additive or subtractive manufacturing methods

A comparative evaluation of marginal fit and microleakage of computer-aided design/computer-aided manufacturing-milled zirconia and prefabricated posterior occlusal veneers: An in vitrostudy

Comparison of marginal fit of gold electroforming-ceramic crown,high gold alloy-ceramic crown and nickel chromium alloy-ceramic crown

Comparing Marginal Microleakage of Three Different Dental Materials in Veneer Restoration Using a Stereomicroscope: an in Vitro Study.

Marginal and Internal Fit of Two Different Zirconium Copings Fabricated on the Implant Abutment

[Marginal Features of CAD/CAM Laminate Veneers with Different Materials and Thicknesses].

Effect of Luting Materials on the Accuracy of Fit of Zirconia Copings: A Non-Destructive Digital Analysis Method

Effect of Tooth Preparation Design on Marginal Adaptation of Composite Resin CAD-CAM Onlays

Effects of different cavosurface margins on color matching of the resin composite

[The Effect of Tooth Preparation Design on the CEREC All-Ceramic Crown's Marginal Adaptation].

Effect of thermomechanical aging on marginal fit of three CAD-CAM restorative materials: An in vitro study

Effect of feldspathic porcelain layering on the marginal fit of zirconia and titanium complete-arch fixed implant-supported frameworks

Analysis of Edge Morphology of Partial Veneers Made by Different Processing Techniques and Materials

Evaluation of marginal and internal adaptation of veneers generated by the guided prosthetic tooth preparation system

Comparison of Fracture Load and Surface Wear of Microhybrid Composite and Ceramic Occlusal Veneers

Vertical marginal gap and internal fit of virgilite-based lithium disilicate glass ceramic veneers with different preparation designs

Clinical Effect Analysis of the Natural Space Close between Upper Anterior Teeth Using Micro Porcelain Veneer