Abstract:Considering the fact that the acoustic attenuation increases with the carrier frequency, the attention shifts towards the low-frequency ultrasonic waves in the field of ultrasonic nondestructive testing and structural health monitoring of highly attenuative materials. However, low-frequency ultrasonic waves may sharply reduce the imaging resolution, although it can propagate longer distance. When an ultrasonic primary longitudinal wave tone burst propagates through an elastic solid with quadratic nonlinearity, it results in the generation of the quasi-static component (QSC). The QSC has advantages of low attenuation and better sound beam directivity, so it is expected to be a novel tool for non-destructive testing of highly attenuative materials. Therefore, aimed at detecting defects and improving the imaging quality in highly attenuative materials, a novel synthetic aperture focusing technique in the time domain combined with nonlinear ultrasonic QSC is proposed. In this study, experimental examinations were carried out to evaluate the imaging performance of the proposed method and low-frequency ultrasonic waves, in which a pulse-echo transducer is used to detect the QSC pulse generated by a primary longitudinal wave. The imaging results indicate that the proposed method has significant advantages over low-frequency ultrasonic waves in terms of visual presentation of defects. The effect of the duration of the tone burst on imaging quality is also investigated, and the results show that the imaging quality is optimal when the cycle number meets the requirement for the maximum response of QSC. This study would open new perspectives for the research on ultrasonic imaging in highly attenuative materials.

Application of adaptive time-frequency decomposition in ultrasonic NDE of highly-scattering materials.

Enhancing Ultrasonic Time-of-flight Diffraction Measurement Through an Adaptive Deconvolution Method

A flaw echo detection method based on S-transformation and time-frequency spectrum spatial filtering

Adaptive Wavelet Thresholding Based Ultrasonic Signal Denoising

Frequency Domain Synthetic Aperture Focusing Technique for Variable-Diameter Cylindrical Components.

Adaptive Frequency Divers Filtering Techniques for Ultrasonic Analysis

Flaw Detection with Ultrasonic Backscatter Signal Envelopes

Flaw Detection in Highly Scattering Materials Using a Simple Ultrasonic Sensor Employing Adaptive Template Matching.

An ultrasonic signal processing method to improve defect depth estimation in composites based on empirical mode decomposition

Adaptive Array Processing For Ultrasonic Non-Destructive Evaluation

Wavenumber-Domain Fast Reconstruction Technique Using Ultrasonic Scanning for Transverse Wave Imaging

Detection of ultrasonic flaw signals using wavelet transform techniques

Contemporary ultrasonic signal processing approaches for nondestructive evaluation of multilayered structures

Enhanced Ultrasonic Flaw Detection Using an Ultra-high Gain and Time-dependent Threshold.

A Bayesian Approach for Sparse Flaw Detection from Noisy Signals for Ultrasonic NDT

Application of the short time Fourier transform to interpret ultrasonic signals

Ultrasonic signal identification by empirical mode decomposition and Hilbert transform

A Time-Frequency Analysis Algorithm for Ultrasonic Waves Generating from a Debonding Defect by Using Empirical Wavelet Transform

Ultrasonic Flaw Echo Enhancement Based on Empirical Mode Decomposition.

Synthetic Aperture Focusing Imaging for Defect Detection in Highly Attenuative Materials Using Quasi-Static Components of Ultrasonic Longitudinal Waves

A Novel Adaptive Time-Frequency Filtering Approach to Enhance the Ultrasonic Inspection of Stainless Steel Structures