Abstract:Commercially pure titanium specimens are subjected to three different treatments, and their bioactivity are evaluated by immersing the specimens in a simulated body fluid (SBF, Kokubo's recipe) for various periods up to 7 days, with particular attention being paid to the differences in apatite deposition between surfaces open to SBF and surfaces in contact with the container's bottom. The treatment with a H(2)O(2)/HCl solution at 80 degrees C for 30 min followed by heating at 400 degrees C for 1 h produces an anatase titania gel layer on the specimen surface. This gel layer deposits apatite both on the contact and on open surfaces, and apatite deposition ability does not change with pre-staking in distilled water. The treatment with a NaOH solution at 60 degrees C for 3 days produces a sodium titanate gel layer. This gel layer can deposit apatite only on the contact surface, and the apatite deposition ability is completely lost after 1 day of pre-staking in distilled water. It is concluded, therefore, that the bioactivity of the titania gel originates from the favorable structure of the gel itself while the bioactivity of the sodium titanate gel depends heavily on ion release from the gel. The third treatment, a simple heat treatment at 400 degrees C for 1 h, produces a dense (not porous) oxide layer on the specimen surface. The specimens can deposit apatite on the contact surface after only 3 days of staking in SBF, but they cannot deposit apatite on the open surface for up to 2 months of staking. The implications of such apatite deposition behavior have been discussed in relation to the environments of titanium implants in bone as well as to the methodology of the SBF staking experiment.

Effect of Dehydration on Structure and Induction Capability for Apatite Formation of Microarc Oxidized TiO2-based Film with Chemical Modification

Characteristic, cell response and apatite-induction ability of microarc oxidized TiO2-based coating containing P on Ti6Al4V before and after chemical-treatment and dehydration

A Comparative Study of in Vitro Apatite Deposition on Heat-, H(2)O(2)-, and NaOH-treated Titanium Surfaces.

Apatite deposition on thermally and anodically oxidized titanium surfaces in a simulated body fluid.

Structure and apatite formation of microarc oxidized TiO2-based films before and after alkali-treatment by various alkali concentrations

Characteristic and in vitro bioactivity of a microarc-oxidized TiO2-based coating after chemical treatment

Effect of heat treatment on the structure and in vitro bioactivity of microarc-oxidized (MAO) titania coatings containing Ca and P ions

Effect of Heat Treatment Atmosphere on the Structure and Apatite-Inducing Ability of Ca, P, Si and Na Incorporated Microarc Oxidation Coating on Titanium

Chemical Etching of Micro-Plasma Oxidized Titania Film on Titanium Alloy and Apatite Deposited on the Surface of Modified Titania Film in Vitro

Structure, cell response and biomimetic apatite induction of gradient TiO2-based/nano-scale hydrophilic amorphous titanium oxide containing Ca composite coatings before and after crystallization.

Effect of Alkali Treatments on Apatite Formation of Microarc-Oxidized Coating on Titanium Alloy Surface

Microstructure and Apatite-Forming Ability of the Mao-Treated Porous Titanium

Characteristic of microarc oxidized coatings on titanium alloy formed in electrolytes containing chelate complex and nano-HA

Effect of Ti-OH Groups on Microstructure and Bioactivity of TiO2 Coating Prepared by Micro-Arc Oxidation

Rapidly Formation of the Highly Bioactive Surface with Hydroxyapatite Crystals on the Titania Micro Arc Oxidation Coating by Microwave Hydrothermal Treatment

Formation of Hydroxyapatite on Ti–6Al–4V Alloy by Microarc Oxidation and Hydrothermal Treatment

Preparation, Cell Response and Apatite-Forming Ability of Microarc Oxidized Coatings Containing Si, Ca and Na on Titanium

Effect of applied voltage on the structure of microarc oxidized TiO2-based bioceramic films

The Structure, Bond Strength and Apatite-Inducing Ability of Micro-Arc Oxidized Tantalum and Their Response to Annealing

The effect of NaOH concentration on the steam-hydrothermally treated bioactive microarc oxidation coatings containing Ca, P, Si and Na on pure Ti surface.

Characteristic and Biocompatibility of the TiO2-based Coatings Containing Amorphous Calcium Phosphate Before and after Heat Treatment