Abstract:<p>Infrastructure damage due to riverbed and bank destabilisation or localised scour may result in considerable financial costs and even loss of life. As the risk to infrastructure keeps increasing due to climate change, the need to directly monitor it becomes crucial. Typically, hazards assessments for infrastructure near water are performed using relatively expensive and indirect methods that require field visits to remote and harsh environments to obtain mean flow measurements, using acoustic Doppler velocimetry [1], laser Doppler velocimetry [2] or water level stations along with discharge hydrographs [3]. In this work, a miniaturized instrumented particle that can provide a direct, non-intrusive and accessible method for the assessment of coarse sediment particles entrainment is developed, calibrated and tested. The particle has a diameter of only 3cm and is fitted with inertial microelectromechanical sensors (MEMS) that enable recording its three-dimensional displacement [4, 5]. The sensor is capable of recording acceleration, angular velocity and orientation at a rate of up to 1000Hz and has deployment time of at least one hour. The data can be transferred and downloaded to a PC or an SD card at a fast transfer rate and in easy format for further analysis. The calibration process of the sensor consisted of simple physical motions and the results of the calibration show that the uncertainties in the calibration experiments and in the accelerometer&#8217;s and gyroscope&#8217;s readings are deemed acceptable. The uncertainty quantification and noise estimation for the sensors, provide the input of the appropriate fusion filter that is applied to the raw data to achieve uncertainty reduction. The testing process consisted of moving the particle on a micro-bed topography and using a camera to record the distance it moved. The orientation of the instrumented particle during testing is determined by inertial sensor fusion of the raw readings of the 3 sensors. The results show that the instrumented particle&#8217;s motion could be detected accurately and therefore it could provide a method for direct assessment of the sediment entrainment due to hydrodynamic forces at low cost and in a non-intrusive and direct manner. The instrumented particle presented has a potential of use in a wide range of future applications around the fields of geosciences and environmental and infrastructures monitoring where sediment entrainment [5] and transport [6] is considered to be the governing process.</p><ol><li>Liu, D., Valyrakis, M., Williams, R. 2017. Flow Hydrodynamics across Open Channel Flows with Riparian Zones: Implications for Riverbank Stability.</li> <li>Diplas, P., Celik, A.O., Valyrakis, M., Dancey C.L. 2010. Some Thoughts on Measurements of Marginal Bedload Transport Rates Based on Experience from Laboratory Flume Experiments.</li> <li>Koursari, E., Wallace, S., Valyrakis, M., Michalis, P. 2019. Remote Monitoring of Infrastructure at Risk due to Hydrologic Hazards and Scour.</li> <li>Valyrakis, M. & Pavlovskis, E. 2014. "Smart pebble&#8221; design for environmental monitoring applications.</li> <li>Valyrakis M., A. Alexakis. 2016. Development of a &#8220;smart-pebble&#8221; for tracking sediment transport.</li> <li>Valyrakis, M., Farhadi, H. 2017. Investigating coarse sediment particles transport using PTV and &#8220;smart-pebbles&#8221; instrumented with inertial sensors.</li> </ol>

Observations of Coastal Sediment Erosion Using In-Line Holography

In-Line Laser Holography and Video Analysis of Eroded Floc from Engineered and Estuarine Sediments

Incipient Erosion Of Biostabilized Sediments Examined Using Particle-Field Optical Holography

The Use of Digital/electronic Holography for Biological Applications

Experimental Observations on the Initiation of Sand-Bed Erosion by an Upward Water Jet

Photogrammetric Investigation of Storm-Induced Erosion Process on Sandy Beach Profile in Medium-Scale Flume

Measuring Colloidomer Hydrodynamics with Holographic Video Microscopy

An Approach For Sensing Underwater Particles Using Digital Holographic Imaging

In-situ observation of aggregate dynamics in a tidal channel using acoustics, laser diffraction and optics

Intrinsic Spatial Shift of Local Focus Metric Curves in Digital Inline Holography for Accurate 3D Morphology Measurement of Irregular Micro-Objects

Laboratory investigation of coastal beach erosion processes under storm waves of slowly varying height

Effects of Diatoms on Erosion and Accretion Processes in Saltmarsh Inferred from Field Observations of Hydrodynamic and Sedimentary Processes

Robust particle outline extraction and its application to digital in-line holograms of marine organisms

New instrumentation for the investigation of sediment suspension processes in the shallow marine environment

Quantifying the Morphology of Calcareous Sands by Dynamic Image Analysis

Effect of belowground structure on coastal wetland erosion resistance using X-Ray Computed Tomography

Granulometry of Two Marine Calcareous Sands

Challenges in the Measurement of Cross-shore Geotechnical Characteristics of Sandy Beach Surface Sediments

Development, calibration and testing of a miniaturized instrumented particle for the study of entrainment of solids in turbulent flows

In situ optical measurement of particles in sediment plumes generated by a pre-prototype polymetallic nodule collector