Abstract:As a promising replacement for nitride red phosphors, Ce: Y3(Mg1.8Al1.4Si1.8)O12(Ce: YMASG) ceramic phosphors have attracted significant attention recently for their advantages in inorganic encapsulation and massive red‐shifting of Ce3+ emission. In this work, Ce: YMASG with different doping concentrations of Ce3+ and Al2O3, was fabricated by vacuum sintering to investigate its effects on the elimination of the impurity phase and the enhancement of the luminescent properties of white light‐emitting diodes (w‐LEDs). It was discovered that the emission wavelength redshifts from 592 nm to 606 nm as the Ce3+ concentration increases, while at 450 K, the emission intensity deteriorates from 0.47 to 0.36 of its initial value. The Rietveld analysis revealed the presence of an impurity phase of Y4MgSi3O13 with a concentration of 17.021 wt% in Ce: YMASG. With the introduction of Al2O3, the impurity phase was eliminated from the matrix completely, the emission peak shifted to a shorter wavelength, and the thermal stability was greatly improved. When the correlated color temperature was controlled at around 3000 K in the packaged w‐LEDs, the commission international de l'éclairage (CIE) chromaticity coordinates shifted toward the bottom left corner of the diagram with increasing concentration of Ce3+. Conversely, the luminous efficiency (LE) increased from 36 lm/W to 58.6 lm/W as the concentration of Al2O3 increased from 0 to 10 wt%, which demonstrated the application prospect of the fabricated phosphor in warm w‐LEDs.

Measurement and numerical studies of optical properties of YAG:Ce phosphor for white light-emitting diode packaging.

White LED Based on YAG : Ce,Gd Phosphor and CdSe–ZnS Core/Shell Quantum Dots

Simulation of optical behavior of YAG:Ce3+@SiO2 phosphor used for chip scale packages WLED

Synthesis, crystal structure and luminescence properties of a Y4Si2O7N2:Ce3+ phosphor for near-UV white LEDs

Growth and characteristics of Ce3+ ions-doped YAG single-crystal optical fibers for LED white light sources

Performance optimization of Ce:YAG sapphire films for high power density white laser-driven lighting applications

Barcode-structured YAG:Ce/YAG:Ce,Mn ceramic phosphors for variable CCT and high CRI LED/LD lighting

The effect of Lu3+ doping upon YAG:Ce phosphor ceramics for high-power white LEDs

Optimization of Ce 3+ concentration and Y 4 MgSi 3 O 13 phase in Mg 2+ ‐Si 4+ Co‐doped Ce: YAG ceramic phosphors

Luminescence saturation studies of YAG: Ce phosphor ceramics for white laser diode lighting

Ce:YScAG Phosphor-Converted Transparent Ceramics with High Thermal Saturation and Weak Concentration Quenching for LED and LD White Lighting

A new BaAl2O4-YAG: Ce composite ceramic phosphor for white LEDs and LDs lighting

Comparative study of Al2O3-YAG:Ce composite ceramic and single crystal YAG:Ce phosphors for high-power laser lighting

Enhancing luminous flux and color rendering of laser-excited YAG:Ce3+ single crystal phosphor plate via surface roughening and low-temperature sintering a CaAlSiN3:Eu2+ phosphor-in-borate glass

Evaluation of Critical Distances for Energy Transfer Between Pr3+ and Ce3+ in Yttrium Aluminium Garnet

Tunable YAG:Ce3+ Ceramic Phosphors for White Laser-Diode Lighting in Transmissive/reflective Models

Luminous Performances Characterization of YAG: Ce3+ Phosphor/Silicone Composites Using Both Reflective and Transmissive Laser Excitations

Fabrication of ternary ZrO2-Al2O3-YAG:Ce ceramic phosphors for white light-emitting diodes

Investigation of a thermally robust orange-red MgO-YMASG: Ce composite phosphor ceramic for white light LED/LD illumination

Effect of extra added Mg2+ and Si4+ on the microstructure and luminescence properties of Ce:YAG ceramic phosphors for high power LED/LD lighting

Interplay between multiple scattering, emission, and absorption of light in the phosphor of a white light-emitting diode