Abstract:We study shallow water flows in river systems. An accurate description of such flows can be obtained using the two-dimensional (2-D) shallow water equations, which can be numerically solved by a shock-capturing finite-volume method. This approach can, however, be inefficient and computationally unaffordable when a large river system with many tributaries and complex geometry is to be modeled. A popular simplified approach is to model flow in each uninterrupted section of the river (called a reach) as one-dimensional (1-D) and connect the reaches at the river junctions. The flow in every reach can then be modeled using the 1-D shallow water equations, whose numerical solution is dramatically less computationally expensive compared with solving its 2-D counterpart. Even though several point-junction models are available, most of them prove to be sufficiently accurate only in the case of a smooth flow though the junction. We propose a new 1-D/2-D river junction model, in which each reach of the river is modeled by the 1-D shallow water equations, while the confluence region, where the mixing of flows from the different directions occurs, is modeled by the 2-D ones. We define the confluence region to be a trapezoid with parallel vertical sides. This allows us to take into account both the average width of each reach and the angle between the directions of flow of the tributary and the principal river at the confluence. We choose a trapezoidal confluence region as it is consistent with the 1-D model of the river. We implement well-balanced positivity preserving second-order semi-discrete central-upwind schemes developed in Kurganov and Petrova (Commun Math Sci 5:133–160, 2007) for the 1-D shallow water equations and in Shirkhani et al. (Comput Fluids 126: 25–40, 2016) for the 2-D shallow water equations using quadrilateral grids. For the 2-D junction simulations in the confluence region we choose a very coarse 2-D mesh as the goal of our model is not to resolve the fine details of complex 2-D vortices that form around the junction, but to efficiently compute average water depth and velocity in the connected 1-D reaches. A special ghost cell technique is developed for coupling the reaches to the confluence region, which is one of the most important parts of a good 1-D/2-D coupling method. The proposed approach leads to very significant computational savings compared to numerically solving the full 2-D problem. We perform several numerical experiments to demonstrate plausibility of the proposed 1-D/2-D coupling model.

A Coupled 1-D and 2-D Channel Network Mathematical Model Used for Flow Calculations in the Middle Reaches of the Yangtze River

2-D numerical method for simulating complex flow field

Two-Dimensional Hydrodynamic Model For Complex Channel Networks

Coupled Finite-Volume Model for 2D Surface and 3D Subsurface Flows

A coupled 1D–2D hydrodynamic model for flood simulation in flood detention basin

STUDY AND APPLICATION OF STEADY FLOW AND UNSTEADY FLOW MATHEMATICAL MODEL FOR CHANNEL NETWORKS

Calculation of water transport capacity of river networks based on mixed models

Development and Performance of a 1D–2D Coupled Shallow Water Model for Large River and Lake Networks

Simple, robust, and efficient algorithm for gradually varied subcritical flow simulation in general channel networks

A STUDY OF SEDIMENT TRANSPORT MODELE IN ONE-DIMENSIONAL NUMERICAL CHANNEL NETWORK MODEL

Dynamic, One-Dimensional Water Quality Model For Gradually Varied Subcritical Flows In General Channel Networks

An efficient,accurate and applicable numerical model for unsteady flows in river networks

Modelling Flow in the Middle and Lower Yangtze River, China

A coupled 1D and 2D hydrodynamic model for free-surface flows

One-Dimensional Numerical Model for Unsteady Flows in Long-Route Open Channel with Complex Inner Boundary Conditions

An implicit 1D-2D deeply coupled hydrodynamic model for shallow water flows

Hydrodynamic Model for Complex Flow in Open-Channel Networks

1D-2D Coupled Numerical Model for Shallow-Water Flows

Coupled one-and two-dimensional hydrodynamic models for levee-breach flood and its application

A two-layer approach for Coupling 1D/2D Shallow Water Flow Models

One-Dimensional/Two-Dimensional Coupling Approach with Quadrilateral Confluence Region for Modeling River Systems.