Abstract:Titanium and titanium alloy materials are often made as medical implants. Surface properties of titanium medical implants play decisive roles for antibacterial and biological response and tissue biocompatibility. In this study, cathode arc evaporation (CAE) technology was used to deposit TiNb–Zr–Ta and nitrogen-doped TiNb–Zr–Ta coatings with nanostructures on the Ti–6Al–4V dental abutment screws. The deposited coatings were then oxidized at high temperature to produce different oxides on the surface of the coatings. The mechanical properties , antibacterial properties and biocompatibilities of the coatings were analyzed. The effect of coatings on the abutment screw loosening and removal torque between the abutment screw and the pure titanium implant fixture was studied by removal torque measurement. In addition, Staphylococcus aureus (S. aureus) was used for evaluating the antibacterial properties of coatings, and mouse fibroblasts (L929) were used for ISO 10993-5 cytotoxicity analyses to determine whether it had good biocompatibility. Nanolayered structures and multiphases of polycrystalline TiNb–Zr–Ta were obtained by co-deposition of Ta , Zr and TiNb. When small content of N was introduced, the TiNb–Zr–Ta(N) showed a polycrystalline TiNb–Zr–Ta where N atoms entered the metallic lattice at interstitial sites. After oxidation, oxide phases of Ta 2 O 5 , TiO 2 , Nb 2 O 5 and ZrO 2 were formed on the surface of TiNb–Zr–Ta and TiNb–Zr–Ta(N). Ta 2 O 5 was obtained on the surface of the coating prior to other oxides such as TiO 2 , Nb 2 O 5 and ZrO 2 . The deposited TiNb–Zr–Ta and TiNb–Zr–Ta(N) coatings had high contact angle and exhibited a hydrophobic feature, while the annealed TiNb–Zr–Ta–O and TiNb–Zr–Ta(N)–O showed hydrophilicity. The deposited TiNb–Zr–Ta had similar hardness and Young's modulus values to that of the uncoated Ti–6Al–4V. When N was doped, the TiNb–Zr–Ta(N) had the highest hardness and Young's modulus. The hardness of the annealed TiNb–Zr–Ta(N) coating only decreased slightly due to the small oxide layer of ∼140 nm. Compared with the uncoated Ti–6Al–4V, TiNb–Zr–Ta serial coatings deposited on abutment screws had higher removal torques, which prevented the abutment screw of dental implant from loosening after long-term use. The biocompatibility of TiNb–Zr–Ta serial coatings was similar to that of the uncoated Ti–6Al–4V. In addition, the oxidized TiNb–Zr–Ta and TiNb–Zr–Ta(N) coatings had excellent antibacterial properties. It is speculated that the resulting Ta 2 O 5 of both coatings may inhibit bacterial growth and improve the antibacterial effect. Based on the above advantages, the TiNb–Zr–Ta serial coatings are expected to have the potential to be applied to biomedical implants.

Effect on Bacterial Adhesion of Dental Medical Ni-Ti and Ni-Cr Alloy Surface with TiN Coating

Antibacterial Effect of Nanometer Ag/TiO2 Coated Brackets

Influence of candida albicans'adhesion on corrosion of Ti alloy and Co-Cr alloy

Enhanced Bacteriostatic Properties of Ti Alloys by Surface Nitriding

Mechanical, antibacterial and cytotoxic characteristics of nanolayered TiNb–Zr–Ta and nitrogen-doped TiNb–Zr–Ta coatings

Influence of TiN coating on the biocompatibility of medical NiTi alloy

Tantalum Nitride-Decorated Titanium with Enhanced Resistance to Microbiologically Induced Corrosion and Mechanical Property for Dental Application

Enhanced Bacterial and Biofilm Adhesion Resistance of ALD Nano-TiO2 Coatings Compared to AO Coatings on Titanium Abutments

Influence of Nitride Coatings on Corrosion Resistance and the Biocompatibility of Titanium Alloy Products

Effects on Cytotoxicity and Antibacterial Properties of the Incorporations of Silver Nanoparticles into the Surface Coating of Dental Alloys

Effect of Silicon Nitride Coating on Titanium Surface: Biocompatibility and Antibacterial Properties

The Underlying Biological Mechanisms of Biocompatibility Differences Between Bare and TiN-coated NiTi Alloys

Corrosion resistance and antibacterial activity of Ti-N-O coatings deposited on dental titanium alloy

Introduction of Antibacterial Function into Biomedical TiNi Shape Memory Alloy by the Addition of Element Ag.

Comparison of TiN and CNx coatings on orthodontic stainless steel: Tribological and biological evaluation

The molecular mechanism for effects of TiN coating on NiTi alloy on endothelial cell function.

Well-Adhered Ti Alloying Layer on NiTi Alloy: Surface Ni Content, Corrosion Resistance, and Cytocompatibility

The Anticorrosion Ability of Titanium Nitride (tin) Plating on an Orthodontic Metal Bracket and Its Biocompatibility.

Biofilm inhibition and bactericidal activity of NiTi alloy coated with graphene oxide/silver nanoparticles via electrophoretic deposition

Temporal dynamics of adhesion of oral bacteria to orthodontic appliances

Antibacterial effects and biocompatibility of titanium surfaces with graded silver incorporation in titania nanotubes.