Determination of benzyl chloride and diphenylmethane in alkylation reaction by the external standard method
LIN Tao,LI Rong,ZHANG Xin,CHEN Guo-liang,ZHANG Gui-quan,GONG Ting,QI Min
DOI: https://doi.org/10.16152/j.cnki.xdxbzr.2011.02.015
2011-01-01
JOURNAL OF NORTHWEST UNIVERSITY(NATURAL SCIENCE EDITION)
Abstract:Aim An external standard method in gas chromatography was established for the determination of benzyl chloride and diphenylmethane in Friedel-Crafts alkylation.Methods PEG-20M packed column(3m×3mm) with FID detector was adopted.The pressure ratio of nitrogen(carrier gas),air and hydrogen was 8:8:5.Splitless injection was chosen.The inlet,column and detector temperatures were 260℃,180℃ and 250℃,respectively.Results The good separation of the benzene,benzyl chloride and diphenylmethane was obtained under optimal chromatographic conditions.When the maximum volume fractions of the benzyl chloride and diphenylmethane were less than 9.09% and 12.5%,the volume fractions and their peak areas were well linear relationship and the linear correlation coefficients were all 0.999.The recovery rates of these two components at low,medium and high concentration levels were 94.59% ～ 104.61% and 98.85% ～ 107.30%.The relative standard deviations were all less than 2.20%.Based on the established external standard method,the reaction temperature,time,and the quantity of the catalyst were optimized.Conclusion The optimization results obtained by this method were consistent with theoretical conclusions.The results show that the proposed method is a fast,accurate and practical method for determining the contents of benzyl chloride and diphenylmethane in the Friedel-Crafts alkylation reaction.