Abstract:This study aimed to compare the dyeing capacity of annatto dye on linen textile substrates under the influence of different mordants, such as ferrous sulphate, alum, chitosan, and poly(diallyldimethylammonium chloride) (PDDACl). Annatto dye was extracted in an alcoholic medium, and the concentrations of the dye compounds bixin and norbixin were determined using ultraviolet‐visible spectrophotometry. Dyeing experiments were conducted with 10% and 20% weight of material (s.p.m.) concentrations, both on mordant‐treated substrates and on substrates pre‐bleached only. The colour evaluation indicated better colour yields for substrates pretreated with alum and PDDACl, with colour strength (K/S) values of 41.14 and 38.74, respectively, for dyeing with 20% s.p.m. However, these substrates exhibited the highest colour deviation (∆E) values in washing and lightfastness tests. The substrate pretreated with ferrous sulphate and the substrate pre‐bleached only showed K/S values of 25.99 and 18.68, respectively, with the ferrous sulphate‐treated substrate exhibiting the lowest ∆E values in washing and lightfastness tests among all evaluated substrates. Chitosan‐cationised samples showed the lowest colour yield, with a K/S of 12.51. Regarding washing and lightfastness, the pre‐bleached only substrate and the chitosan‐pretreated substrate displayed intermediate ∆E values. The dyeing kinetics of pre‐bleached substrates exhibited pseudo‐first‐order behaviour, while for ferrous sulphate‐pretreated samples, pseudo‐second‐order behaviour was observed. Langmuir's adsorption model was suitable for pre‐bleached substrate dyeing and ferrous sulphate‐pretreated sample dyeing in adsorption isotherms. However, for mordanted samples, higher adsorption intensity was observed.

Application of Chitosan in Linen Fabric Dyeing

Effects of Chitosan Pretreatment on Dyeing Behaviors of Linen Fabric

Dyeing Performance Improvement of Linen Fabric Treated with Chitosan

Study On The Application Of Chitosan For Natural Dyes Dyeing On Cotton Fabrics

A sustainable approach for linen dyeing and finishing with natural lac dye through chitosan bio-mordanting and microwave heating

Effect of Wetting Pretreatment on Structure and Properties of Plasma Induced Chitosan Grafted Wool Fabric

Preparation of Chitin with Different Degrees of Deacetylation from Crab Shells Waste and Its Application in the Removal of Congo Red

To enhance the dyeability of cotton fiber with the application of reactive dyes by using chitosan

In Situ Synthesis of a Double-Layer Chitosan Coating on Cotton Fabric to Improve the Color Fastness of Sodium Copper Chlorophyllin

Improving the Dyeing Properties of Peanut Skin Extracts to Flax Fabrics by Chitosan Pretreatment

Glow discharge plasma in water: a green approach to enhancing ability of chitosan for dye removal.

Exploring the dyeing potential of annatto dye on linen substrate: An inquiry into the effects of different mordants

Superadsorption of LiOH Solution on Chitosan As a New Type of Solvent for Chitosan by Freezing/blasting

Preparation of Modified Chitosan Microspheres and their Anionic Dye Adsorption Behaviors

The Adsorption of Sulphonated Azo‐dyes Methyl Orange and Xylenol Orange by Coagulation on Hollow Chitosan Microsphere

Dyeing behavior of linen fibers modified by low temperature plasma

Mechanical and Dye Adsorption Properties of Graphene Oxide/chitosan Composite Fibers Prepared by Wet Spinning

Performance of the Anti-Bacterial Finishing with Chitosan

Preparation and Adsorption Properties of Diethylenetriamine‐modified Chitosan Beads for Acid Dyes

Research of Application of Enzyme to Linen Fabric Pretreatment Processing

Improvement of the Graft and Dyeability of Linen by DBD Treatment in Ambient Air