Abstract:At constant rotating speed, localized faults in rotating machine tend to result in periodic shocks and thus arouse periodic transients in the vibration signal. The transient feature analysis has always been a crucial problem for localized fault detection, and the key aim for transient feature analysis is to identify the model and its parameters (frequency, damping ratio and time index) of the transient, and the time interval, i.e. period, between transients. Based on wavelet and correlation filtering, a technique incorporating transient modeling and parameter identification is proposed for rotating machine fault feature detection. With the proposed method, both parameters of a single transient and the period between transients can be identified from the vibration signal, and localized faults can be detected based on the parameters, especially the period. First, a simulation signal is used to test the performance of the proposed method. Then the method is applied to the vibration signals of different types of bearings with localized faults in the outer race, the inner race and the rolling element, respectively, and all the results show that the period between transients, representing the localized fault characteristic, is successfully detected. The method is also utilized in gearbox fault diagnosis and the effectiveness is verified through identifying the parameters of the transient model and the period. Moreover, it can be drawn that for bearing fault detection, the single-side wavelet model is more suitable than double-side one, while the double-side model for gearbox fault detection. This research proposed an effective method of localized fault detection for rotating machine fault diagnosis through transient modeling and parameter detection.

Synchronous enhancement of periodic transient feature based on polar diagram for bearing fault diagnosis

Synchronous Enhancement Of Periodic Transients On Polar Diagram For Machine Fault Diagnosis

Detection of signal transients based on wavelet and statistics for machine fault diagnosis

Transient Modeling and Parameter Identification Based on Wavelet and Correlation Filtering for Rotating Machine Fault Diagnosis

Wavelet-Enhanced Time-Frequency Analysis Method for Bearing Fault Detection of Rotating Machinery

A Method of Bearing Fault Feature Extraction Based on Improved Wavelet Packet and Hilbert Analysis

Periodic Sparsity Oriented Super-wavelet Analysis with Application to Motor Bearing Fault Detection of Wind Turbine

Bearing Fault Feature Detection Based on Parameter Identification of Transient Impulse Response

Periodic Impulsive Fault Feature Extraction of Rotating Machinery Using Dual-Tree Rational Dilation Complex Wavelet Transform

Detection of weak transient signals based on unsupervised learning for bearing fault diagnosis

Bearing Fault Detection Via Wavelet Packet Transform and Rough Set Theory

Time-varying Singular Value Decomposition for Periodic Transient Identification in Bearing Fault Diagnosis

Transient feature extraction based on double-TQWT and its application in bearing fault diagnosis

A local transient feature extraction method via periodic low rank dynamic mode decomposition for bearing incipient fault diagnosis

Extraction of Rolling Bearing Fault Feature Based on Time-wavelet Energy Spectrum

FEATURE DETECTION AND FAULT DIAGNOSIS BASED ON CONTINUOUS WAVELET TRANSFORM

Multiple Transient Extraction Algorithm and Its Application in Bearing Fault Diagnosis

A Spectrum Detection Approach for Bearing Fault Signal Based on Spectral Kurtosis

Extraction of Weak Transient Signals Based on Adaptive Window Merging for Rolling Bearing Fault Diagnosis

Lkurtogram Guided Adaptive Empirical Wavelet Transform and Purified Instantaneous Energy Operation for Fault Diagnosis of Wind Turbine Bearing

A Joint Sparse Wavelet Coefficient Extraction and Adaptive Noise Reduction Method in Recovery of Weak Bearing Fault Features from a Multi-Component Signal Mixture.