Abstract:We demonstrated an all-fiber comb filter that can continuously tune the wavelength for four switchable wavelength spacings. The comb filter consists of a fiber loop mirror (FLM) that is inserted with three polarization maintaining fibers (PMFs) and three polarization controllers (PCs). The transmission characteristics of the comb filter was theoretically analyzed. The output characteristics of the comb filters shows a dependence of the orientation angles of the PCs. With the angles being optimally set, the comb filter with four different wavelength spacings can be achieved. The wavelength continuously tunable and wavelength spacing variable mechanisms are elaborated. The three PCs are employed to enable the tunable and switchable functions. The two PCs between the PMFs serve as a polarization rotator to align the birefringent axes of the PMFs for varying the wavelength spacing while the PC adjacent to the optical coupler can be used for wavelength tuning function. When the two quarter-waveplates (QWPs) of the PC are optimally set at π/4 and - π/4, the half-waveplate (HWP) acts as a wavelength tuning element, and when the QWPs are set at zero degrees, the HWP serves as an amplitude tuning element. The center wavelength of the comb filter could be linearly tuned with the rotation angle of the HWP, and a π/2 change in the rotation angle leads to a wavelength change in one free-spectral-range (FSR). A π/4 change in the rotation angle could bring the normalized peak transmission from its maximum at 1 to minimum at 0. The proposed tunable technique has been verified by our experimental results. We experimentally demonstrated the comb filters can switch among FSRs of 0.75 nm, 1.01 nm, 1.51 nm, and 3.1 nm with tunable functions.

Continuously tunable microwave-photonic filter design using high-birefringence linear chirped grating

Programmable All-Fiber Structured Waveshaper Based on Linearly Chirped Fiber Bragg Grating and Digital Thermal Controller

Tunable and Programmable Fiber Ring Laser Based on Digital-Controlled Chirped Fiber Bragg Grating

Photonic Microwave Transversal Filter Employing A Fiber-Bragg-Grating-Based Multiple Resonator

Microwave Photonic Filter Using Air-Guiding PBGF

Tunable Microwave Photonic Filters Based on Double-Sideband Modulation and Linear Chirped Fibre Bragg Gratings

Engineering Waveguide-Cavity Resonant Side Coupling in A Dynamically Tunable Ultracompact Photonic Crystal Filter

Reconfigurable Microwave Photonic Transversal Filter Using a Variable Gain Tilt Filter

Tunable Chirped Microwave Photonic Filter Employing A Dispersive Mach-Zehnder Structure

Four‐tap Microwave Photonic Filter with Tunable Center Frequency and Reconfigurable Transfer Function

Tunable Photonic Microwave Filters Based on Fibre Loop

Tunable Multi-Tap Microwave Photonic Filter With Complex Coefficients Using A Dual-Parallel Mach-Zehnder Modulator

Microwave Bandpass Filter Based on Air-Core Photonic Bandgap Fiber Loop Mirror

Software-defined Microwave Photonic Filter with High Reconfigurable Resolution

Continuously Tunable Incoherent Microwave Photonic Filter Using a Tunable Mach‒Zehnder Interferometer As the Slicing Filter

Design and Simulation of a Narrow Passband Electro-Optical Tunable Filter with Band-pass and Band-rejection Output

A tunable submicro-optofluidic polymer filter based on guided-mode resonance.

Dual-band Photonic Filters with Wide Tunable Range Using Chirped Sampled Gratings

All-Fiber-Optics-Based Microwave Photonic Filter with Tunable Center Frequency and Passband Plus Notch

Design of Broadband and Arbitrary Profile Filters Using Large Chirped Fiber Grating

Wavelength continuously tunable and wavelength spacing variable comb filter based on a High-Birefringence fiber loop mirror