Abstract:It is thought that high-dielectric constant, suitable conductivity, and dielectric loss dominate electrorheological (ER) effects. According to this viewpoint, the polyaniline/montmorillonite nanocomposite (PANI-MMT) particles with high-dielectric constant and suitable conductivity were synthesized by an emulsion intercalation method. The electrorheological properties of the suspensions of PANI-MMT particles in silicone oil have been investigated under direct current electric fields. At room temperature, it was found that the yield stress of PANI-MMT ER fluid was 7.19 kPa in 3 kV/mm, which is much higher than that of pure polyaniline (PANI), that of pure montmorillonite (MMT) as well as that of the mixture of polyaniline with clay (PANI+MMT). In the range of 10–100 °C, the yield stress changed only 6.5% with the variation of temperature. The sedimentation ratio of PANI-MMT ERF was about 98% after 60 days. The structure of PANI-MMT particles was characterized by infrared, x-ray diffraction (XRD), and transmission electron microscopy (TEM) spectrometry, respectively. The XRD spectra show that the inner layer distance of PANI-MMT can be enhanced to 1.52 nm when the PANI was inserted into the interlayer of MMT, whereas it is only 0.96 nm for free MMT. TEM shows that the diameter of PANI-MMT particles is about 100 nm. The dielectric constant of PANI-MMT nanocomposite was increased 5.5 times that of PANI and 2.7 times that of MMT, besides, the conductivity of PANI-MMT particle was increased about 8.5 times that of PANI at 1000 Hz. Meanwhile, the dielectric loss tangent can also be increased about 1.7 times that of PANI. It is apparent that the notable ER effect of PANI-MMT ER fluid was attributed to the prominent dielectric property of the polyaniline-montmorillonite nanocomposite particles.

Increasing Electrorheological Response of Particles: the Effect of Conductive Polymer

The electrorheological performance of polyaniline-based hybrid particles suspensions in silicone oil: influence of the dispersing medium viscosity

Synthesis of Titanate/Polypyrrole Composite Rod-Like Particles and the Role of Conducting Polymer on Electrorheological Efficiency

Electrorheological Effect of Suspensions of Polyaniline Nanoparticles with Different Morphologies

The Electrorheological Effect of Polyaniline Nanofiber, Nanoparticle and Microparticle Suspensions

Electrorheological Properties of Suspensions of Polypyrrole Ribbon Particles in Silicone Oil

Enhanced Stimuli-Responsive Electrorheological Property Of Poly(Ionic Liquid)S-Capsulated Polyaniline Particles

Electrorheological Characteristics of Polyaniline/Titanate Composite Nanotube Suspensions

Molybdenum and Tungsten Disulfides Surface-Modified with a Conducting Polymer, Polyaniline, for Application in Electrorheology

Synthesis and Electrorheological Properties of Polyaniline‐coated Barium Titanate Composite Particles

Polyaniline Nanocomposites For Smart Electrorheological Fluid Applications

Particulate Volume Effect in Suspensions with Strong Electrorheological Response

Electrorheological fluids based on nano-fibrous polyaniline

Electrorheological Characteristics of Poly(diphenylamine)/magnetite Composite-Based Suspension

The Effect of Dielectric Polarization Rate Difference of Filler and Matrix on the Electrorheological Responses of Poly(ionic liquid)/Polyaniline Composite Particles

The Electrorheological Properties of Polypyrrole Suspensions

Electrorheological Properties of New Mesoporous Material with Conducting Polypyrrole in Mesoporous Silica

Electrorheological Properties of a Polyaniline–montmorillonite Clay Nanocomposite Suspension

Electrorheological Properties of Suspensions Based on Polyaniline-Montmorillonite Clay Nanocomposite

Seeded swelling polymerized sea urchin-like core–shell typed polystyrene/polyaniline particles and their electric stimuli-response

Low Temperature Interfacial Polymerization and Enhanced Electro-Responsive Characteristic of Poly(ionic liquid)s@polyaniline Core-shell Microspheres.