Abstract:Virtual testing is a method that simulates lab testing using multi-body dynamic analysis software. The main advantages of this approach include that the design can be evaluated before a prototype is available and virtual testing results can be easily validated by subsequent physical testing. The disadvantage is that accurate specimen models are sometimes hard to obtain since nonlinear components such as tires, bushings, dampers, and engine mounts are hard to model. Therefore, virtual testing accuracy varies significantly. The typical virtual rigs include tire and spindle coupled test rigs for full vehicle tests and multi-axis shaker tables for component tests. Hybrid simulation combines physical and virtual components, inputs and constraints to create a composite simulation system. Hybrid simulation enables the hard to model components to be tested in the lab. As a result, it greatly reduces the requirement for an accurate analysis model and increases the chance for obtaining more accurate results. Mechanical Hardware-in-the-Loop? (mHIL™) is one of the hybrid simulation approaches. It has been developed to enable actual physical components to replace selected components for "Real-Time" vehicle dynamic simulation. In this approach, the virtual to physical coupling is accomplished in "real-time" allowing an accurate vehicle dynamics simulation to be conducted in a hybrid environment. The disadvantage of this approach is that the "real-time" requirement poses significant constraints on the model and test rig. To address the limitation of real-time techniques, an alternative technique, Hybrid System Response Convergence (HSRC), has been developed. The HSRC method uses an iterative approach to develop a solution that satisfies the equations of motion for the hybrid system. The iterative approach allows the physical and virtual systems to run sequentially as open-loop systems, rather than simultaneously, thus avoiding the requirement to run in real-time. The disadvantage of this method is that an iterative approach is more time consuming. Another approach addressing the limitation of real-time is to use a software named OpenFresco and a predictor-corrector algorithm to connect dynamic analysis software and a test system. If the solving speed cannot meet the requirement of real time, the predictor-corrector algorithm slows down the actuator to allow more time for the model to be solved. This approach is called soft real-time hybrid simulation. The disadvantage of this approach is that it still requires the hybrid simulation to be conducted at the near "real-time" speed.

Positioning and driving virtual prototyping with metaphors in dynamic analysis

Visualized External Force/Torque Interaction in Virtual Prototyping Dynamics Analysis

Studying on the Technique of Integration Analysis to Rigid-Flexible Mixture Virtual Prototyping in Complex Mechanic System

Design and Modeling of a Test Bench for Dual-Motor Electric Drive Tracked Vehicles Based on a Dynamic Load Emulation Method

Analyses on Vehicle Ride Comfort Based on Virtual Prototype Technology

A virtual environment simulator for mechanical system dynamics with online interactive control

STABLE PROGRAMMED MANIFOLD SOLVER FOR VIRTUAL PROTOTYPING MOTION SIMULATION

Modeling and Simulation on Axial Piston Pump Based on Virtual Prototype Technology

Advances of Virtual Testing and Hybrid Simulation in Automotive Performance and Durability Evaluation

Modeling and simulation of virtual robotic excavator prototype

Description & Integration of Multi-Disciplinary Model in Virtual Prototype Engineering

Dynamic Modeling and Simulation of a Hybrid Robot

Simulating Driving Feel For Virtual Driving Simulator Based On Semi-Physical Simulation

Simulation of the Assistant Characteristic of EPS Based on Vitual Prototype Technology

A novel approach for experimental identification of vehicle dynamic parameters

Dynamic simulation of a hydraulic exoskeleton robot based on virtual prototyping

The Development of the Virtual Prototype of a Multi -Freedom Mechanism

Evaluation of Joint Driving Torque and Finite Element Analysis in Articulate Robot through the simulation of Multi-Body Dynamics

Dynamic Modeling and Digital Twin of a Harmonic Drive Based Collaborative Robot Joint

Virtual Prototyping and Experimental Research of Vehicle Stability Control

Virtual durability test rigs for automotive engineering