Abstract:Polymeric materials are being increasingly used to replace many metallic components due to their beneficial properties such as higher strength-to-weight ratio and corrosion resistance. However, the widespread use of polymers poses a risk to the environment as they are not biodegradable. The addition of the waste jute fiber and sawdust fiber as reinforcement to the epoxy resin improved its toughness and induced the biodegradability of the polymer. To examine the effect of the jute fiber and sawdust fiber on biodegradability, the composites were then kept in the drainage system for one year, and the impact energy and fracture morphology of the as-cast and weathered samples were examined using a drop ball impact test and a Charpy impact test. During the weathering period, weight gain was initially observed due to the water absorption by the porous fibers, but after three months, the composites started to lose weight due to the degradation of the fiber by swelling and microbial attacks. Microorganisms in the drainage system used the fiber as their energy source, which resulted in the deterioration of the fiber and the production of CO2. The production of CO2 was identified by the FTIR analysis of the weathered composite samples. TGA analysis of the as-cast and weathered samples reveals the reduction of the onset thermal degradation temperature of the weathered composites due to the degradation of the composites. The fiber disintegrated through microbial attack and the fiber swelling caused by the absorption of water by jute fiber and sawdust fiber is identified through SEM imaging. The SEM image also reveals the formation of biofilms and the growth of microorganisms at the fibers. A higher growth rate of the microorganisms was observed in the jute fiber composite than in the sawdust fiber composite, as sawdust contains a high level of lignin that protects it from degradation. The results of this study suggest that both sawdust fiber and jute fiber composites induce biodegradability in the epoxy matrix, but jute fiber was more prominent in this regard. The discovery paves the way for using natural fibers in biodegradable polymer composites, reducing polymeric pollution in the environment.

Accelerated Weathering and Biodegradation of E-Glass Polyester Composites

Hydrolytic and Compost Degradation of Biobased PBSF and PBAF Copolyesters with 40–60 Mol% BF Unit

Simultaneous Evaluation of Composite Biodeterioration and Changes in the Physicochemical and Biological Water Characteristics

Accelerated Weathering Testing (AWT) and Bacterial Biodegradation Effects on Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)/Rapeseed Microfiber Biocomposites Properties

Enhanced Biodegradation Rate of Poly(butylene adipate-co-terephthalate) Composites Using Reed Fiber

Waste natural fibers for polymer toughening and biodegradability of epoxy-based polymer composite through toughness and thermal analysis

Effect of Fiber Cross-Sectional and Surface Properties on the Degradation of Biobased Polymers

Investigation of Degradation of Composites Based on Unsaturated Polyester Resin and Vinyl Ester Resin

Biodegradation of Lignocellulose-Polyester Composite Films in Freshwater and Seawater Conditions

Biodegradation Patterns of Composite Materials Based on High-Density Polyethylene and Starch

Biodegradation Behavior of Degradable Mulch with Poly (Butylene Adipate-co-Terephthalate) (PBAT) and Poly (Butylene Succinate) (PBS) in Simulation Marine Environment

Impact of the Harsh Environment on E-Glass Epoxy Composite

Biocomposites of Low-Density Polyethylene Plus Wood Flour or Flax Straw: Biodegradation Kinetics across Three Environments

Effects of Hydrothermal Aging of Carbon Fiber Reinforced Polycarbonate Composites on Mechanical Performance and Sand Erosion Resistance

Studies on the Enzymatic Degradation Process of Epoxy-Polyurethane Compositions Obtained with Raw Materials of Natural Origin

Experimental investigation of long-term performance of fiber-reinforced epoxy and polyurethane polymer composites

Trickily designed copolyesters degraded in both land and sea - confirmed by the successful capture of degradation end product CO2

Study of the influence of accelerated aging on the physical and mechanical properties of polymer composites containing rubber, polyethylene and poly(ethylene terephthalate) waste

Degradation mechanism of green biopolyester nanocomposites with various cellulose nanocrystal based nanohybrids

Microbial degradation of the waste jute fiber and sawdust fiber-based epoxy composites in drainage system

Accelerated Weathering of Polylactic Acid/Agave Fiber Biocomposites and the Effect of Fiber–Matrix Adhesion