Abstract:Raman spectroscopy is used to elucidate the effect of spinning conditions upon the structure and mechanical properties of silk spun by Nephila spiders from the major ampullate gland. Silk fibers produced under natural spinning conditions with spinning rates between 2 and 20 mm s −1 differed in microstructure and mechanical properties from fibers produced either more slowly or more rapidly. The data support the “uniform strain” hypothesis that the reinforcing units in spider silk fibers are subjected to the same strain as the fiber, to optimize the toughness. In contrast, in the case of synthetic high-performance polymer fibers, the both units and the fiber experience uniform stress, which maximizes stiffness. The comparison of Nephila major and minor ampullate silks opens an intriguing window into dragline silk evolution and the first evidence of significant differences between the two silks providing possibilities for further testing of hypotheses concerning the uniform strain versus uniform stress models. Impact statement It is well established that the microstructure and mechanical properties of engineering materials are controlled by the conditions employed to both synthesize and process them. Herein, we demonstrate that the situation is similar for a natural material, namely spider silk. We show that for a spider that normally produces silk at a reeling speed of between 2 and 20 mm s −1 , silk produced at speeds outside this natural processing window has a different microstructure that leads to inferior tensile properties. Moreover, we also show that the silk has a generic microstructure that is optimized to respond mechanically to deformation such that the crystals in the fibers are deformed under conditions of uniform strain. This is different from high-performance synthetic polymer fibers where the microstructure is optimized such that crystals within the fibers are subjected to uniform stress. Graphic abstract

Toughness of Spider Silk at High and Low Temperatures

Temperature‐Induced Effects on Wet‐Spun Artificial Spider Silk Fibers

From Structure To Mechanical Properties Of Spider Silk: Surviving From Severe Collision

Foundation of the Outstanding Toughness in Biomimetic and Natural Spider Silk

Spinning Conditions Affect Structure and Properties of Nephila Spider Silk

Variability in the Mechanical Properties of Spider Silks on Three Levels: Interspecific, Intraspecific and Intraindividual.

The Effect of Solvents on the Contraction and Mechanical Properties of Spider Silk

The Effect of Spinning Conditions on the Mechanics of A Spider'S Dragline Silk

Active control on molecular conformations and tensile properties of spider silk

Using Solvents with Different Molecular Sizes to Investigate the Structure of Antheraea Pernyi Silk

Spider silk: super material or thin fibre?

Extended wet-spinning can modify spider silk properties.

Variability of Mechanical Properties of Spider Dragline Silk

Relationship Between the Mechanical Properties of Spider Dragline Silk and Spiders Control and Spinning Condition

Tensile Mechanical Properties of Araneus Ventricosus Spider Silk

Unraveled Mechanism In Silk Engineering: Fast Reeling Induced Silk Toughening

Strain Rate Dependent Mechanical Behavior of B. Mori Silk, A. Assama Silk, A. Pernyi Silk and A. Ventricosus Spider Silk

Relationships Between Supercontraction and Mechanical Properties of Spider Silk

Study on Thermal Properties of Spider Silk

Structural origin of the strain-hardening of spider silk

Understanding the Mechanical Properties of Antheraea Pernyi Silk-From Primary Structure to Condensed Structure of the Protein