Abstract:Different methods of producing nanostructured materials at the laboratory scale have been studied using a variety of physical and chemical techniques, though the challenge here is the homogeneous distribution of the elements which also depends on the precursor elements. This work thus focused on the micro-analytical characterization of Cu-Ni-Co metallic nanoparticles produced by an alternative chemical route aiming to produce solid solution nanoparticles. This method was based on two steps: the co-formation of oxides by nitrates' decomposition followed by their hydrogen reduction. Based on the initial composition of precursor nitrates, three homogeneous ternaries of the Ni, Cu and Co final alloy products were pre-established. Thus, the compositions in %wt of the synthesized alloy particles studied in this work are 24Cu-64Ni-12Co, 12Cu-64Ni-24Co and 10Cu-80Ni-10Co. Both precursor oxides and metallic powders were characterized by means of X-ray powder diffraction (XRD), scanning electron microscopy (SEM/EDS) and transmission electron microscopy (TEM). The results show that the synthesis procedure was successful since it produced a homogeneous material distributed in different particle sizes depending on the temperature applied in the reducing process. The final composition of the metallic product was consistent with what was theoretically expected. Resulting from reduction at the lower temperature of 300 °C, the main powder product consisted of particles with a spheroidal and eventually facetted morphology of 50 nm on average, which shared the same FCC crystal structure. Particles smaller than 100 nm in the Cu-Ni-Co alloy agglomerates were also observed. At a higher reduction temperature, the ternary powder developed robust particles of 1 micron in size, which are, in fact, the result of the coarsening of several nanoparticles.

Synthesis and magnetic properties of Fe–Co–Ni nanoparticles by hydrogen plasma–metal reaction

Synthesis and Magnetic Properties of FeCo Alloy Nanoparticles by Hydrogen Plasma Metal Reaction

Synthesis and structural features of Ni–Al nanoparticles by hydrogen plasma–metal reaction

Synthesis and characterization of nanoparticles of Alnico alloys

Synthesis of iron–nickel nanoparticles via a nonaqueous organometallic route

Synthesis and Magnetic Properties of Pt3Co/Fe3O4Nanocomposites

Synthesis of Fe-Al Nanoparticles by Hydrogen Plasma-Metal Reaction

Synthesis and characterization of Fe/Nd2O3 core-shell nanoparticles by hydrogen plasma-metal reaction.

Synthesis and Characterization of Fe/Nd2O3 Core–Shell Nanoparticles by Hydrogen Plasma-Metal Reaction

Sonochemical synthesis, structural and magnetic properties of air-stable Fe/Co alloy nanoparticles

Preparation and Characteristics of Fe3al Nanoparticles by Hydrogen Plasma-Metal Reaction

Chemical Synthesis of Monodisperse Fe-Ni Nanoparticles Via A Diffusion-Based Approach

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

Preparation and Properties of Fe-Co-Ni Alloy/co0.5ni0.5fe2o4 Magnetic Composite Nanofibers

Hybridization and Characteristics of Fe and Fe−Co Nanoparticles with Polymer Particles

Synthesis and Properties of Nanostructured Mg2Ni-Based Compounds

Synthesis and hydrogen storing properties of nanostructured ternary Mg–Ni–Co compounds

Synthesis and characterization of Fe–Ti nanoparticles by nitrogen plasma metal reaction

Characterization of Ternary CuNiCo Metallic Nanoparticles Produced by Hydrogen Reduction

$\mathrm{Fe}_{1-x}\mathrm{Ni}_x$ Alloy Nanoparticles Encapsulated inside Carbon Nanotubes: Controlled Synthesis, Structure and Magnetic Properties

Synthesis and Properties of Nanostructured Mg<sub>2</sub>Ni-Based Compounds