Abstract:The C=C double bonds in the main chain of hydroxyl-terminated polybutadiene (DHTPB), obtained by the degradation of polybutadiene rubber, were partially epoxided using m-chloroperoxybenzoic acid (mCPBA) as epoxidation reagent. A series of epoxided HTPBs (EHTPB) with different epoxy contents (5%, 10% and 15%) were prepared by tuning the molar ratio of mCPBA to C=C double bonds. The structures of EHTPBs were characterized by Fourier transform-infrared (FTIR), nuclear magnetic resonance (H-1-NMR) spectroscopy and gel permeation chromatography (GPC). The epoxy percent in EHTPBs from H-1-NMR spectra was in accordance with the design. In addition, a series of EHTPB-based polyurethane elastomers (EPU) were prepared by the reaction between EHTPB and 4,4'-diphenylmethane diisocyanate with 1,4-butanediol as a chain extender. Mechanical and thermal properties of the EPU samples were characterized by tensile test, differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). With increased epoxy percent in EHTPB, the Young's modulus and the tensile strength of the EPU samples increased, whereas the elongation at break decreased. The sample EPU10 prepared with 10% of epoxy had the best mechanical properties with 8.82 MPa as Young's modulus, 7.83 MPa as tensile strength, and (485 +/- 23)% as elongation at break. The elasticity recovery of the EPU sample was slightly better than HTPB-based PU (EPU0). The results with TGA test showed that the thermal degradation of EPU, similar to EPU0, was divided into three stages. However, the EPU samples had better thermal stability with the initial degradation temperature at 210 degrees C, about 30 degrees C higher than that of EPU0. The DSC results showed that the glass transition temperature (T-g) of EPU gradually increased as epoxy percent was increased, though still lower than that of HTPB (FHTPB) based PUs prepared by free-radical polymerization.

Properties of New Energetic Thermoplastic Polyurethane Elastomer

Preparation and Properties of Epoxided Hydroxyl-terminated Polybutadiene Based Polyurethane Elastomers

Novel Polyethylene‐b‐polyurethane‐b‐polyethylene Triblock Copolymers: Facile Synthesis and Application

Viscoelastic Property Evolution of Thermoplastic Polyurethane During Annealing Treatment and Its Correlation with Segmental Crystallization

Effect of soft segment structure on properties of polyurethane elastomers

The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

Thermal and Mechanical Properties of Ultrahigh-Molecular-Weight Ethylene/1-Hexene Copolymers Prepared by Living Polymerization with Fluorinated Bis(Phenoxy-Imine) Titanium(Iv) Catalyst

Microphase Separation and Thermo-Mechanical Properties of Energetic Poly(urethane–urea)

Synthesis and Characterization of XDI-based Thermoplastic Polyether Polyurehtane Elastomers

Effect of Hard and Soft Segment on Structure-Property of Thermoplastic Polyurethane Elastomer

Preparation and Characterization of Graft Copolymer EVA-g-PU

Synthesis and Characterization of Thermoplastic Polyether-imide Elastormer

Synthesis and properties of high performance thermoplastic polycarbonate polyurethane elastomers through a non-isocyanate route

Synthesis and Properties of Cast PU Elastomers with Molecularly Uniform Hard Segments Based on TDI and DMTDA

STRUCTURE AND PROPERTIES OF POLY (Ε-Caprolactone)-based CASTABLE POLYURETHANE ELASTOMERS

Study on Mechanical Properties of Polyurethane Cross-Linked P(E-co-T)/PEG Blended Polyether Elastomer

Morphology And Mechanical Properties Of Ethylene-Vinyl Acetate Rubber/Polyamide Thermoplastic Elastomers

A new class of poly(ether‐ block ‐amide)s based on semi‐aromatic polyamide: synthesis, characterization and structure–property relations

Structure-property behavior of polyurea synthesized with different kinds of amino polyether

A Novel Semiaromatic Polyamide Thermoplastic Elastomer with Excellent Heat Resistance and Mechanical Properties