Abstract:Abstract Real tooth contact analysis of spiral bevel gears is based on the original tooth surface grids (OTSG) formed by coordinate measuring machine (CMM). Since the size of OTSG is smaller than the tooth surface, it is sometimes impossible to get full meshing information. Reverse engineering is a way to solve the problem. The basic idea is to expand OTSG to the tooth surface boundary by reversing the manufacturing parameters of the spiral bevel gear drive. Thus a generalized reversing objective is set up for both of the gear and the pinion, which is the summation of deviations of all nodes between OTSG and corresponding computational tooth surface grids (CTSG) expressed by manufacturing parameters. The gear manufacturing parameters are reversed by observing duplex method. The pinionmanufacturing parameters are reversed by attempting the meshing behavior taken as input to local synthesis with modified roll motion. The initial meshing behavior is approximately ascertained by discrete tooth contact analysis based on OTSG, and meshing behavior at the mean contact point is figured out by interpolation method for function of transmission errors and contact path. Having reversed the manufacturing parameters, OTSG is expanded to the tooth surface boundary and real tooth contact analysis is conducted. A zero bevel gear drive of an aviation engine was employed to demonstrate the validity of the proposed methodology. The proposed method makes the real tooth contact analysis practical and provides prospect to improve meshing behavior more precisely.

Analysis of Oil Saw Chain Meshing and Design of Chain Drive Chip Contour

Kinematic Chain Optimization Design Based on Deformation Sensitivity Analysis of a Five-Axis Machine Tool

Finite Element Analysis and Fatigue Life Calculation of the Drive Chip in Saw Chain

Design Optimization of a Rocker-Joint Silent Chain and Sprocket Drive Based on the Mesh Performance Indices

A New Method for Polygon Effect Analysis of Saw Chain

Study on the New Roller Chain Drive Tooth Profile and Its Dynamic Characteristics

An Analysis and Simulation on Meshing Force of Main Chain Drive in Baling Process of Round Balers

Dynamic Performance Research and Design Optimization of Gasoline Engine Timing Sprocket

Automated Analysis of Meshing Performance of Harmonic Drive Gears under Various Operating Conditions

Meshing equation, tooth contact analysis, stress analysis and manufacture of a point-contact gear formed by double-arc milling cutter

An adaptive geometric meshing theory for the face-milled generated spiral bevel gears

Research on the Cutting Dynamics for Face-Milling of Spiral Bevel Gears

Mesh Dynamics Analysis of Gear Shaving Cutter Research Based on ADAMS Software

Kinematic-Geometric Lubrication Theory and Its Application to Arc-Toothed Cylindrical Worm Drive

Contact Finite Element Method for Dynamic Meshing Characteristics Analysis of Continuous Engaged Gear Drives

Circular Spline Tooth Longitudinal Modification Design and Contact Analysis for Harmonic Drives with Short Flexspline

Influence of cut parameters on mesh performance of spiral bevel gear by duplex spread blade method

A Novel Analytical Method for Meshing Characteristics of Spiral Bevel Gears Considering Slice Coupling

Multi-Constrained Analysis Of Metal Cutting And Its Application

Computerized Investigation of Real Tooth Contact Analysis of Face-milled Spiral Bevel Gears

Tooth surface geometry optimization of spiral bevel and hypoid gears generated by duplex helical method with circular profile blade