Abstract:The use of biomass-based combined heat and power (CHP) plants is considered by the EU administration to be an effective way to increase the use of renewables in the energy system, to reduce greenhouse gas emissions and to alleviate the dependency on imported fossil fuels. At present in Sweden, most of the CHP plants are operated in part-load mode because of variations in heat demand. Further use of the potential heat capacity from CHP plants is an opportunity for integration with other heat-demanding processes. Retrofitting the conventional CHP plants by integration with bioethanol and pellet production processes is considered a feasible and efficient way to improve the plants’ performances. Modeling and simulation of the CHP plant integrated with feedstock upgrading, bioethanol production and pellet production is performed to analyze the technical and economic feasibility. When integrating with bioethanol production, the exhaust flue gas from the CHP plant is used to dry the hydrolysis solid residues (HSR) instead of direct condensation in the flue gas condenser (FGC). This drying process not only increases the overall energy efficiency (OEE) of the CHP plant but also increases the power output relative to the system using only a FGC. Furthermore, if steam is extracted from the turbine of the CHP plant and if it is used to dry the HSR together with the exhaust flue gas, pellets can be produced and the bioethanol production costs can be reduced by 30% compared with ethanol cogeneration plants. Three optional pellet production processes integrated with an existing biomass-based CHP plant using different raw materials are studied to determine their annual performance. The option of pellet production integrated with the existing CHP plant using exhaust flue gas and superheated steam for drying allows for a low specific pellet production cost, short payback time and significant CO2 reduction. A common advantage of the three options is a dramatic increase in the total annual power production and a significant CO2 reduction, in spite of a decrease in power efficiency. The retrofitted biomass-based CHP plants play a crucial role in the present and future regional energy system. The total costs are minimized for the studied energy system by using wastes as energy sources. Analyses of scenarios for the coming decades are performed to describe how to achieve a regional fossil fuel-free energy system. It is possible to achieve the target by upgrading and retrofitting the present energy plants and constructing new ones. The conditions and obstacles have also been presented and discussed through optimizing the locations for proposed new energy plants and planting energy crops.

Integrated Conceptual Design of Heating System at A Swedish Mining Company

The many faces of heating transitions. Deeper understandings of future systems in Sweden and beyond

Holistic non-linear optimization of the layout, sizing, and operation of a district heating plant

Techno-economic analysis of an integrated bioreﬁnerysystem for poly-generation of power, heat, pelletand bioethanol

Collaborative optimization of energy conversion and NOx removal in boiler cold-end of coal-fired power plants based on waste heat recovery of flue gas and sensible heat utilization of extraction steam

Modelling and Mapping Sustainable Heating for Cities

Development of integrated technology for waste heat recovery from humid flue gas of hot water boiler

Conceptual design and optimization of cogeneration system based on small modular lead‐cooled fast reactor

Proposal and Techno-Economic Analysis of a Novel System for Waste Heat Recovery and Water Saving in Coal-Fired Power Plants: A Case Study

Techno-economic Performances of Clean Heating Solutions to Replace Raw Coal for Heating in Northern Rural China

Achieving emission reduction through the utilisation of local low-grade heat sources in district heating networks

Decarbonization of Existing Heating Networks through Optimal Producer Retrofit and Low-Temperature Operation

Performance Analysis and Optimization of Solar-Coupled Mine Water-Source Heat Pump Combined Heating and Cooling System

System Design and Theoretical Analysis of Lignite-fired CHP Based on Lignite Pre-drying and Waste Heat Recovery from Dryer Exhaust

Modeling and 4E analysis of a new combined cooling, heating, and power energy system based on biogas combustion and hot oil for heat supply

Design on a Novel Waste Heat Recovery System Integrated with the Bypass Flue and Outside Primary Air Preheater for Bitumite-Fired Power Plants

Mathematical simulation of the flue-gas recovery system for coal-fired boilers based on the direct-contact heat exchanger

Analytical and numerical investigations on the high temperature upgrading solution of subcritical boilers

Optimization and Analysis of Combined Heat and Water Production System Based on a Coal-Fired Power Plant

Optimal day-ahead scheduling for distributed cleaning heating system with minimal carbon emissions

Thermo-Economic Optimization on the Waste Heat Recovery System of SCO2 Coal-Fired Power Plants