Abstract:Temperature cracking is one of the primary disease forms of asphalt pavements. The cracking of asphalt pavements caused by low temperature is rare. However, the problem of temperature fatigue damage caused by repeated changes in temperature is particularly pronounced and affects the service condition of pavement material and structure all the time. In this study, the mechanical behavior and damage characteristics of temperature fatigue for asphalt mixtures under temperature variation were systematically analyzed and discussed through tests and numerical analysis methods, quantifying the effects of monotonic and cyclic temperature variation on asphalt mixtures. Based on the modified temperature stress restrained specimen test (TSRST), the lowtemperature cracking test with the monotonic temperature variation and the temperature stress test in the cyclic temperature variation were carried out. Through theoretical analysis and calculation, the variation law of mechanical response of asphalt mixtures with temperature and time was obtained, the mechanical behavior of asphalt mixtures under the cyclic temperature variation was elucidated. Moreover, on the basis of testing results, the mechanical behavior of asphalt mixtures under different temperature ranges and different cooling rates was simulated and analyzed using the finite element method (FEM). The damage characteristics of temperature fatigue for asphalt mixtures under cyclic temperature variation during service life were revealed. The results of the study showed that: In the low-temperature cracking test, the temperature stress of asphalt mixtures increases non-linearly at a uniform cooling rate, using different cooling rates (10°C/h, 8°C/h, 6°C/h, 4°C/h, 2°C/h) for the simulation, it can be obtained that the faster the cooling rate, the larger the temperature stress generated. In the cyclic temperature stress test, due to the viscoelastic properties of asphalt mixtures, the temperature stress shows significant stress relaxation phenomena with temperature variation. The maximum values of temperature stress decrease gradually within each cycle. It revealed that under the same temperature variation, the temperature stress generated by the specimen decreases continuously. Through the simulation, it can be obtained that under different cooling ranges (-20°C to -10°C, -10°C to 0°C) and different cooling rates (10°C/h, 20°C/h), the temperature stress increases with the temperature range decrease. The temperature stress increases with the increase of the cooling rate, and the fatigue damage showed the same variation law. Different temperature ranges (-20 to 10°C, -10 to 0°C) and different pre-crack sizes (W10-H20 mm, W10-H10 mm, W5-H20 mm and W5H10 mm) were used to simulate the crack propagation by temperature cycle. The results showed that the lower the temperature range, the larger the stress intensity factor (K I ) generated. The faster crack propagation leads to the fewer number of temperature cycles. The pre-crack width has a lesser effect on the number of temperature cycles, while the pre-crack height has more influence.

Study of Low Temperature Cracking of Asphalt Pavement Based on Cohesive Zone Model

Fracture Behavior of Asphalt Pavement with Cracked Base Course under Low Temperature

Cohesive Cracking Simulation of Asphalt Mixture with Reflective Crack Through Xfem

Low-Temperature Cracking Analysis of Asphalt Pavement

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Numerical Simulation of Low-temperature Shrinkage Cracking of Asphalt Pavement Based on Cohesive Zone Model

Evaluation of the Fracture Resistance of Asphalt Mixtures Based on Bilinear Cohesive Zone Model

Effects of moisture contents, fracture modes, and temperatures on fracture toughness and crack distribution of asphalt concrete at low-temperature

Simulation of asphalt concrete cracking using Cohesive Zone Model

Viscoelastic Fracture Analysis of Asphalt Concrete Pavement with Cracks

Investigation of the Microstructural Fracture Behaviour of Asphalt Mixtures Using the Finite Element Method

Analysis of the Crack Fracture Morphology of the Asphalt Mixture under Tensile Stress Effects

Numerical Investigation of Asphalt Concrete Fracture Based on Heterogeneous Structure and Cohesive Zone Model

Low Temperature Crack Predicting Model for Asphalt Pavement and Its Application

A Study on Critical Cracking Temperature of Asphalt

Simulation of Low-Temperature Brittle Fracture of Asphalt Mixtures Based on Phase-Field Cohesive Zone Model

Numerical Simulation of Crack Propagation in Flexible Asphalt Pavements Based on Cohesive Zone Model Developed from Asphalt Mixtures

Analysis of Temperature Stress and Temperature Fatigue Characteristics of Asphalt Mixtures

Thermal Analysis of Asphalt Pavement with More Cracks

Analysis of Surface Crack Propagation of Asphalt Pavement

Cohesive Zone Modeling of I–II Mixed Mode Fracture Behaviors of Hot Mix Asphalt Based on the Semi-Circular Bending Test