Process optimization of esterification for deacidification in waste cooking oil: RSM approach and for biodiesel production assisted with ultrasonic and solvent
Haifeng Bai,Jianshen Tian,Dilinuer Talifu,Kenji Okitsu,Abulikemu Abulizi
DOI: https://doi.org/10.1016/j.fuel.2022.123697
IF: 7.4
2022-06-01
Fuel
Abstract:This study investigated the use of waste cooking oil, as a raw material for biodiesel production, solves its treatment problem, and provides additional value. The low acid value is achieved by the esterification process with H2SO4 as a catalyst for deacidification of FFAs which was optimized using response surface design to invest the effect of the operating parameters in this work. The effects of reaction time, catalyst concentration, temperature, and the molar ratio of methanol to oil on the deacidification were analyzed by the regression model equation in detail. The optimum conditions of the ratio of methanol to oil ratio (8), H2SO4 catalysis concentration (5 wt%), reaction temperature (60℃), and reaction time (108 min) were obtained and an acid value of 0.42 was achieved. The pre-esterified oil was used to produce biodiesel through transesterification with ultrasonic and solvent, and 98.5% FAME yield was achieved under the optimal condition that catalyst dosage of 2 wt%, the molar ratio of oil to methanol of 1:6, reaction temperature of 40℃, solvent type of n-hexane, the solvent dosage of 8: 1, pulse time of 7 s on/1s off, and ultrasonic power of 130 W. Therefore, this study clearly showed the necessity of pre-esterification of WCO as raw material, and assisted measures of ultrasound and co-solvent for biodiesel production, which is more efficient, less time-consuming, and more helpful than the usual process because it reduces the optimal conditions needed to achieve high FAME% yield.
energy & fuels,engineering, chemical