Abstract:The rotor radial force is changed by adjusting the windings current value to control rotor suspension for various kinds of bearingless switched reluctance motor (BSRM). To accomplish the BSRM's suspension control, the radial force analytical model is necessary. Currently the mathematic relationship among radial force, winding currents, and rotor rotation angle has been built for double-winding BSRM, but the rotor eccentricity displacement has not been considered. That is, the existing radial force analytical model only can be used to analyze rotor radial force when rotor shaft is located in the central position. Actually, the rotor radial force is significantly affected by the rotor shaft eccentricity displacement. It is difficult for the bearingless motor to keep the rotor shaft staying in the central position, and the rotor shaft always runs around the central position with an eccentricity displacement. The rotor eccentricity caused by the radial force is considered in the paper to obtain the air-gap permeance and the windings inductances. Furthermore, the radial forces analytical model considering the rotor eccentricity displacement is derived. Finally, the finite-element method (FEM)-based results are applied and the dynamics simulation using the proposed model is accomplished to verify the correctness of the model.

Radial Force Computation of SR Motor and Its Second Development Based on ANSYS

Development of Electromagnetic Field Analysis Software of Switched Reluctance Motors Based on ANSYS Platform

A Method for Calculating the Inductance of Switched Reluctance Motor Based on End Inductance Coefficient Function

Research on a Novel Axial Field Disk Type Switched Reluctance Motor

Research on the Rotary-Linear Motion Magnetic Gear Based on Ansys

Structural Design and FEA of a New Type of Multi-DOF Spherical Induction Motor Without Output Shaft

Design and Analysis of a Linear-Rotary Permanent Magnet Motor with Orthogonal Windings

Static Torque Analysis and Calculation of Enhanced Hybrid Stepping Motor Based on ANSYS

Numerical Analysis of Force-angle Characteristic of RLSMR

Modeling and Optimal Design of the Rotary-Linear Type Two-Degree-of-Freedom Ultrasonic Motors

Improved Radial Force Modeling and Rotor Suspension Dynamics Simulation Studies for Double-Winding Bearingless Switched Reluctance Motor

Design and analysis on switched reluctance motor system using field-circuit coupled method

Investigation on Different Stator Structures of the Axial-Radial Flux Switched Reluctance Motors

A Novel Two-Degree-of-freedom Spherical Ultrasonic Motor Using Three Travelling-Wave Type Annular Stators

Modeling and tests for a stator of a traveling-wave type spherical ultrasonic motor with 2-DOF

Radial force analytic modeling for a novel bearingless switched reluctance motor when considering rotor eccentricity

Analysis of a Novel Brushless Doubly Fed Machine with Radial Laminated Reluctance Rotor Based on Finite Element Method

Finite Element Analysis of Electromagnetic Force in Doubly-Salient Motor

Switched Reluctance Motor Drive System Model and Simulation Based on ANSYS and SIMULINK

Simulation Study of SRM Stator Pole Structure with FEM

Analysis and Calculation of Radial Electromagnetic Force of Circular Winding Brushless DC Motor