Abstract:In this paper, Ce-modified Cu-based carbon materials (Cu-Ce/AC) were prepared by impregnation method using walnut shell as the carbon precursor, Cu-ammonia solution as Cu source and Ce as modifier. The catalytic wet air oxidation (CWAO) degradation of phenol wastewater was carried out in a self-assembled fixed-bed reactor. The stability of Cu-Ce/AC catalyst under different pH conditions was studied. This study combines XRD, BET, FT-IR, ICP-OES and XPS characterization techniques to study the main reasons for the deactivation of Cu-Ce/AC catalysts. The reaction mechanism of Cu-Ce/AC catalytic wet air oxidation degradation of phenol was clarified. The result indicates that although phenol was completely converted in the CWAO process, the acidic intermediate product produced were difficult to completely degraded. Therefore, the pH of the solution gradually decreased. In acidic environment, the interaction between active component Cu and carbon carrier is weak, resulting in a large amount of metal leaching into the solution. As a result, the COD conversion gradually decreases. The alkaline environment can effectively slow down the leaching of catalyst Cu while maintaining its high catalytic activity. In addition, the incompletely degraded intermediate products are easy to accumulate and deposit on the Cu-Ce/AC surface, block the micropores and cover the surface-active sites, which reduces the catalyst activity. The study also found that there is a redox cycle between Cu+, Cu2+ Ce3+ and Ce4+ during phenol degradation, which enables Cu and Ce to form a strong interaction. The redox cycle can also promote the formation of oxygen vacancy (h+), O2−·, and HO·, making the degradation of phenol more thorough. At the same time, the mutual conversion between metal lattice oxygen and surface chemisorbed oxygen can generate high concentration of oxygen defect sites, which can improve the oxygen storage capacity of Cu-Ce/AC. These oxygen vacancies also provide more reactive sites to further promote adsorption and catalytic oxidation degradation of phenol and intermediate products.

Catalytic Ozonation of Phenol and Oxalic Acid with Copper-Loaded Activated Carbon

Enhanced Conversion from H2O2 to 1O2 on Cu–N Centers: Investigation of Mechanisms and Application in Alkaline Wastewater Treatment

Catalytic ozonation of phenol in aqeuous solution coupled with nickel oxide-loaded activated carbon

Deactivation characteristics of Ce-modified Cu-based carbon materials for catalytic wet air oxidation of phenol wastewater

Flexible Phosphorus-Doped Activated Carbon Fiber Paper In-Situ Loading of CuO for Degradation of Phenol

Catalytic Wet Air Oxidation of Phenols over Porous Plate Cu-based Catalysts

Catalytic oxidation of 4-acetamidophenol with Fe3+-enhanced Cu0 particles: In-site generation and activation of hydrogen peroxide

Enhancement Mechanism of Heterogeneous Catalytic Ozonation by Cordierite-Supported Copper for the Degradation of Nitrobenzene in Aqueous Solution.

Catalytic ozonation of phenol in aqueous solution by Co3O4 nanoparticles

Insight into the Activation of Peroxymonosulfate by N-doped Copper-Based Carbon for Efficient Degradation of Organic Pollutants: Synergy of Nonradicals

g‐C3N4 Coating Enhanced Cu@AC for Catalytic Wet Air Oxidation of Phenol under Mild Conditions

Enhanced catalytic ozonation performance by CuOx nanoclusters/TiO2 nanotube and an insight into the catalytic mechanism

Sintering- and oxidation-resistant ultrasmall Cu(I)/(II) oxides supported on defect-rich mesoporous alumina microspheres boosting catalytic ozonation

Experimental and Theoretical Investigation of the Catalytic Ozonation on the Surface of NiO-CuO Nanoparticles.

Enhanced catalytic ozonation performance by CuO<sub>x</sub> nanoclusters/TiO<sub>2</sub> nanotube and an insight into the catalytic mechanism

In-situ Synthesis of Highly Dispersed Cu-CuxO Nanoparticles on Porous Carbon for the Enhanced Persulfate Activation for Phenol Degradation

Zinc Ferrite Catalysts for Ozonation of Aqueous Organic Contaminants: Phenol and Bio-Treated Coking Wastewater

STUDY ON CATALYTIC OZONATION DEGRADATION OF GUAIACOL WITH CUPRIC OXIDES LOADED ON ACTIVATED CARBON

Ultrahigh Peroxymonosulfate Utilization Efficiency over CuO Nanosheets Via Heterogeneous Cu(III) Formation and Preferential Electron Transfer During Degradation of Phenols.

MnFe2O4/MoS2 catalyst used for ozonation: optimization and mechanism analysis of phenolic wastewater treatment

Mechanism and Toxicity Evaluation of Catalytic Ozonation over Cu/Ce–Al2O3 System Aiming at Degradation of Humic Acid in Real Wastewater