Abstract:The unsatisfactory cycle life of nickel-based cathodes hinders the widespread commercial usage of nickel-zinc (Ni-Zn) batteries. The most frequently used methods to improve the cycle life of Ni-based cathodes are usually complicated and/or involve using organic solvents and high energy consumption. A facile process based on the hydrolysis-induced exchange of the cobalt-based metal-organic framework (Co-MOF) was developed to prepare aluminum (Al)-doped cobalt-nickel double hydroxides (Al-CoNiDH) on a carbon cloth (CC). The entire synthesis process is highly efficient, energy-saving, and has a low negative impact on the environment. Compared to undoped cobalt-nickel double hydroxide (Al-CoNiDH-0%), the as-prepared Al-CoNiDH as the electrode material displays a remarkably improved cycling stability because the Al-doping successfully depresses the transition in the crystal phase and microstructure during the long cycling. Benefiting from the improved performance of the optimal Al-CoNiDH electrode (AlCoNiDH-5% electrode), the as-constructed aqueous Ni-Zn battery with Al-CoNiDH-5% as the cathode (AlCoNiDH-5%//Zn) displays more than 14% improvement in the cycle life relative to the Al-CoNiDH-0%//Zn battery. Moreover, this Al-CoNiDH-5%//Zn battery achieves a high specific capacity (264 mAh g(-1)), good rate capability (72.4% retention at a 30-fold higher current), high electrochemical energy conversion efficiency, superior fast-charging ability, and strong capability of reversible switching between fast charging and slow charging. Furthermore, the as-assembled quasi-solid-state Al-CoNiDH-5%//Zn battery exhibits a decent electrochemical performance and satisfactory flexibility. (C) 2020 Elsevier Inc. All rights reserved.

Electrochemical Performances of Bi Based Compound Film-Coated ZnO As Anodic Materials of Ni–Zn Secondary Batteries

Preparation and Electrochemical Performance of Nanosized Bi Compounds-Modified ZnO for Zn/Ni Secondary Cell

Electrochemical Performances of Ni-Coated ZnO As an Anode Material for Lithium-Ion Batteries

Investigation of In-Situ Polymerization Synthesized Carbon-Coated Zinc Oxide As Anode Material for Zn/Ni Secondary Battery

Effect of material composition on the performance for ZnO@C/Bi as Zn anode

Communication—Bimetallic-MOFs-Derived ZnO/Bi2O3 Composites As Anode Materials for Advanced Zinc-Based Batteries

Electrochemical Performance of ZnO Nanoplates As Anode Materials for Ni/Zn Secondary Batteries

Preparation, Characteristics and Electrochemical Performance of Sn6O4(OH)4-coated ZnO for Zn–Ni Secondary Battery

Facile synthesis of uniformly coated ZnO@Bi 2 O 3 composites anode for long-cycle-life zinc–nickel battery

Aluminum-doping-based Method for the Improvement of the Cycle Life of Cobalt–nickel Hydroxides for Nickel–zinc Batteries

Influence of surface modification with Sn6O4(OH)4 on electrochemical performance of ZnO in Zn/Ni secondary cells

Sn6O4(OH)(4) Coated on ZnO Surface: Preparation and Application in Zinc-Nickel Secondary Battery

Electrochemical Performance and Morphology Evolution of Nanosized ZnO As Anode Material of Ni–Zn Batteries

Size and Morphology Effects of Zno Anode Nanomaterials for Zn/Ni Secondary Batteries

Morphology Effect on the Electrochemical Performance of NiO Films As Anodes for Lithium Ion Batteries

Solid-Phase Synthesis of ZnO@Bi 2 O 3 Core–Shell Composites for Long-Life NiZn Batteries

Characteristics and Electrochemical Performance of Ni-coated ZnO Prepared by an Electroless Plating Process

Semiconductor Material ZnO-Coated P2-Type Na2/3Ni1/3Mn2/3O2 Cathode Materials for Sodium-Ion Batteries with Superior Electrochemical Performance

Modification of Zinc Anodes by In Situ ZnO Coating for High-Performance Aqueous Zinc-Ion Batteries

Nanoporous Nb 2 O 5 coatings enabled long-life and deeply rechargeable zinc anodes for aqueous zinc-ion batteries

Ag-modification improving the electrochemical performance of ZnO anode for Ni/Zn secondary batteries