Abstract:Cyclone separators are widely used in industrial applications. Their separation efficiency and pressure drop influence on the performance of processing systems. The simulations presented in this paper, the flow behavior of gas and particles is simulated by means of computational fluid dynamics with three-dimensional Eulerian-Lagrangian simulations. The RNG k-epsilon model and the Reynolds stress model (RSM) were used to model gas turbulence. The flow behavior is examined in the terms of velocity components, static pressure and pressure drop contour plots for flow field, and gas-solid concentration. Simulations show that the gas volume fraction is increased in the top of cyclone and that the particle concentration is increased in the bottom of cyclone under the action of gravitational force. Also the results show that the particle concentration along the radial direction of cyclone can be divided into two regions: a central region of the cyclone area with low particle concentration and the wall region with a high particle concentration. The gas and particles flow within the cyclone under the influence of centrifugal and gravitational force making the particles flow to the wall, and leading to increased particle concentration near the walls and in the bottom of cyclone. Comparison of the results given by velocity components, pressure fields and volume fraction can describe the turbulent flow. The high pressure near the wall due to centrifugal force creates a depression on the axis of the cyclone. The results of this study indicate that pressure drop increases with increasing inlet velocities for both RSM and RNG k-E models, moreover the RSM model gives a higher pressure drop compared to the RNG k-E model. The RSM model provides well for the forced vortex and free vortex, and better captures the phenomena within intense vortex flow in the presence of walls within cyclone separators

Numerical Simulation and it's Industrial Application of Gas-solid Two Phase Flow in Horizontal Cyclone Separator with Accelerating Section

Numerical Simulation and Experimental Investigation of Flow Field in Gas-Liquid Cylindrical Separator with Baffle Configuration

Numerical Simulation of Three Dimensional Gas-Particle Flow in a Spiral Cyclone

Experimental Study and Numerical Simulation of the Characteristics of a Percussive Gas–solid Separator

Numerical Simulation of Gas and Particle Flow in Cyclone Separators

Numerical Simulation of the Flow Field and Performance of an Innovative Cyclone Separator with a Downward Discharge of Gases

Numerical simulation of gas solid characteristics in double inlet square cyclone separator

NUMERICAL SIMULATION AND OPTIMIZATION OF GAS-SOLID TWO-PHASE FLOW IN ONE CFBC CYCLONE SEPARATOR

Numerical Simulation Study on Separation Performance of Cyclone Separator Based on Fluent

Numerical Simulating the Gas-solid Flow in Square Cyclone With a Curved Inlet

Numerical Simulation of Multi-Tubular Bundle Tube Cyclone Separator

Numerical Simulation on Structure Optimization of Liquid-Gas Cylindrical Cyclone Separator

Numerical study of gas-solid flow in a radial-inlet structure cyclone separator

Numerical Simulation Of Gas-Solids Flow And Parametrical Studies In A Horizontal Square Cyclone

Discrete Particle Simulation of Gas-Solid Flow in A Cyclone Separator

Characteristic of Separation and Numerical Simulation of Finest Particles in Cyclone Separator

Numerical Study of the Flow Field and Particle Separation Characteristics for a Diffusion Type Cyclone Separator

Numerical Simulation and Experimental Study on the Performance of Gas/Liquid Spiral Separator

Numerical Simulation of Gas-solid Flow in a Square Separator With Double Inlets

Numerical Simulation of Two-Phase Flow Field in Horizontal Square Cyclone

Numerical simulation of the particle-wall collision strength and swirling effect on the performance of the axial flow cyclone separator