Abstract:Objective To analyze the dynamics response of head and neck to -Gx acceleration and to evaluate the stability of helmet by simulating the movement of head and neck under -Gx acceleration and measuring the mechanics parameters. Methods A swing pendulum was designed based on the head and neck of HYBRID III dummy. The body at the lower end of neck impacted the wave generator when the pendulum swing moved forward. The acceleration of impact, head response, force and torque at lower end of neck and helmet displacement were measured. The differences on dummy's head and neck dynamic response and the displacement of helmet were compared between the states of wearing helmet and wearing helmet mounted display. Results The duration of force and torque at the lower end of dummy′s head and neck was significantly longer than that of impact acceleration. As with the helmet, -Gx peak amplitude of the impact acceleration was (6.82±0.27) G and the pulse width was (42.63±1.04) ms, the peak amplitude and pulse width of head response acceleration was (5.66±0.16) G and (173.91±2.31) ms, the force and torque at lower end of neck was (390.37±10.98) N and (183.51±6.26) ms, (79.64±2.70) N·m and (164.17±1.53) ms respectively. The angular and linear displacement of the helmet relative to head was (13.16°±4.61°) and (21.51±10.58) mm respectively. There were statistically significant differences on pulse width of head response acceleration, force and torque at lower end of neck between the states of wearing helmet and wearing helmet mounted display (t=12.947, 3.105, 17.871, P<0.05). The experiment showed that helmet with display caused bigger displacement. There were statistically significant differences on the peak acceleration and pulse width between the impact and the head response both under the states of wearing helmet and wearing helmet mounted display (t=20.48-485.26, P<0.01). Conclusions The swing pendulum test method could basically reflect the dynamics response and motion features of head and neck to -Gx acceleration. The results have important significance on evaluating the safety of head and neck and stability of helmet. Key words: Acceleration; Head protective device; Neck; Dynamics response

Responses of Mini-Pig Thorax-Lumbar Spine under High G Value Impact

Mathematical Modeling Of High G Protection Afforded By Various Anti-G Equipment And Techniques

Reaction of a human head/neck/torso system to shock

A simulation study on central hemodynamics during +Gz with protection afforded by extended-coverage anti-G suit

Study on evaluation guideline and injury factor of head,neck,thorax and vertebra during high G landing impact

Numerical simulation on response of human spine with different bone mineral density to landing impact

Influence of muscle activation on lumbar injury under a specific +Gz load

Response Analysis of Lumbar Vertebra Model under Axial Impact Loading

Dynamics Response of Head and Neck Under -Gx

A Sensitivity Study of the Porcine Head Subjected to Bump Impact

Dynamics Response of Head and Neck to -Gx Acceleration when Wearing Helmet

Experimental study of head dynamics response of + Gx ＆ + Gz impact

Biomechanical investigation of thoracolumbar spine in different postures during ejection using a combined finite element and multi-body approach

Chest response assessment of post-mortem swine under blast loadings

Preliminary study into the skeletal injuries sustained to the spine from posterior non-perforating ballistic impacts into body armour

Response of a human head/neck/upper-torso replica to dynamic loading--I. Physical model

Region specific anisotropy and rate dependence of Göttingen minipig brain tissue

Human lumbar spinal column injury criteria from vertical loading at the base: Applications to military environments

Pelvis and thoracolumbar spine response in simulated under-body blast impacts and protective seat cushion design

Dynamics response and injury assessment of Hybrid-III thorax subjected to oblique impact

Hypergravity stimulates mechanical behavior and micro-architecture of tibia in rats