Abstract:Because of their beautiful appearance, strong crossing ability, and reasonable stress performance, the application of tied steel box arch bridges is becoming more and more extensive. Bridge construction monitoring can control and adjust the deviation state to ensure the stress and linear state of the bridge after completion. This study carried out a symmetrical construction monitoring analysis and completed state evaluation of the newly built Dafeng River Bridge in Guangxi Province based on the finite element method. MIDAS Civil finite element software is used for simulation analysis to calculate the deformation and stress of the tied steel box arch bridge at the construction and completion stages. The tensile and compressive stress of the main arch and transverse brace, as well as the cumulative displacements of the main arch and lattice beam, are symmetrically distributed. The maximum tensile and compressive stresses are 15.1 MPa and 74.6 MPa, respectively, less than the specification's allowable value. Meanwhile, for the completed bridge under the loading combinations of serviceability limit state and bearing capacity ultimate limit state, the stress of the main arch, transverse brace, and lattice beam meets the specification requirements. The maximum cable forces of the suspender and tie rod under the bearing capacity ultimate limit state are 2189.4 kN and 2991.2 kN, and their corresponding minimum safety factors are 3.2 and 2.7. In addition, the deviations between the on-site monitoring and the finite element theoretical values are within the specification allowable range for the cable force of the suspender and tie rod and the bridge deck alignment. It indicates that the bridge construction monitoring effect is reasonable and ideal, and the symmetrically finite element simulation analysis can provide a theoretical basis for construction monitoring.

ANALYSIS OF THE STRESS AND DEFORMATION OF STEEL BOX GIRDER OF CHUNYI BRIDGE ACROSS HAIHE RIVER DURING THE CONSTRUCTION

An analytical method and its application for large-section PC box girder bridges

Simulation Analysis of Girder Transport Process on the Box Girder of Hangzhou Bay Bridge

Stress Behavior in Embedded Connection Zone of Box Girder with Corrugated Steel Webs

Mechanical Behavior of Box Girder Bridge with Partial Corrugated Steel Webs

Temperature Field and Stress Field of Prestressed Concrete Box-Girder Bridge

TORSIONAL DEFORMATION CALCULATION OF LARGE SPAN THIN-WALLED STEEL BOX GIRDER WITH OPEN SECTION

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Field Test and Analysis for the Static and Dynamic Behaviour of Multi-Box Steel Concrete Composite Girder Bridge

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Influence analysis of group studs stiffness in accelerated construction steel-concrete composite small box girder bridges

Finite Element Analysis Of Large-Tonnage Bracing Member Of Bengbu Bridge Of Tianjin Haihe River

Symmetrically Construction Monitoring Analysis and Completed State Evaluation of a Tied Steel Box Arch Bridge Based on Finite Element Method

Designing Computation and Comparative Analysis on Strengthening Schemes of Sight Bridge's Steel Box Girder

ANALYSIS OF TRANSVERSE THERMAL STRESS OF LARGE SPAN CONCRETE BOX GIRDER

Finite Element Analysis in Dynamic Conditions of Bridge Crane Beam

Static Characteristic Analysis of Long Span Continuous Curved Steel Box Girder Bridge

Numerical simulation analysis of construction of steel truss arch bridge with in-situ reconstruction of continuous girder bridge

Stress and deformation analysis of the steel pipe arch integral lifting construction process of a continuous beam arch bridge

Construction Simulation of Middle Column of Prefabricated Box Girder Bridge in Prefabrication Stage

Bearing capacity analysis of a curvilinear box girder landscape bridge