Abstract:The main objective of this study is to investigate the impact of the micro-fabric and soil mineralogy on the overall macro-behavior of the completely decomposed granite soil through a set of drained and undrained triaxial shearing and isotropic compression tests on a medium-coarse grading completely decomposed granite soil. The mineral composition of the soil was a substantial factor governing the compressive behavior. The soil compressibility increased significantly in the case of existence crushable and weak minerals within the soil minerals like fragile feldspar, as well as the high content of fines, especially the plastic fines. The scanning electron microscopic photos indicated that the micro-fabric of the soil had a paramount impact on the compressive behavior. The mechanism of the volumetric change depended on the stress levels, the soil mineral composition and the grain morphology. In the low consolidated stress levels, the soils’ grains rearrangement was the prevailing mechanism of the volumetric change, particularly with the absence of weak and crushable minerals. On the other hand, at the high consolidated stress levels, particles’ crushing was the prevailing mechanism in the volumetric change. Both the mechanisms of volume change could occur simultaneously at the low stress levels in the case of presence crushable minerals in addition to micro-cracks in the soil grains. The soil showed an isotropic response after 250 kPa, as this stress level erased the induced anisotropy from the moist tamping preparation method. Under the drained shearing conditions, the soil showed a contractive response, while during the undrained shearing conditions, the soil exhibited both the contractive and dilative responses with phase transformation points. The studied soil showed a unique critical state line, irrespective of the drainage conditions and initial states, the critical state line was parallel to the isotropic compression line in the void ratio effective stress space. In the deviator effective mean stresses space, the studied soil approached a unique CSL with a critical stress ratio equal 1.5, corresponding to critical friction angle of 36.8°.

An Elasto-Plastic Model for Saturated Loosely Compacted Completely Decomposed Granite

Modified Duncan-Chang Model Considering Physical Properties of Saturated Clays

Undrained mechanical behavior of saturated completely decomposed granite: experimental investigation and constitutive modeling

Study of Mechanics Behavior and Constitutive Model of Cemented Soil under Static Triaxial Tests

An Elasto-Plastic Constitutive Model For Cement Treated Soil Based On Super-Subloading Yield Surfaces

Effect of Loading Path on the Mechanical Properties of Completely Decomposed Granite Soil Based on the Multiscale Method

Constitutive modeling of dense gravelly soils subjected to cyclic loading

Modeling the Compression Behavior of Dredged Sandy Clays Considering the Effect of Initial Water Contents and Sand Fractions

A constitutive model for granular soils

A Simplified Elastoplastic Constitutive Model under Undrained Cyclic Loading

A Unified Constitutive Model for Unsaturated Soil under Monotonic and Cyclic Loading

A coupled strain softening and hardening model for completely weathered granite in a fault zone

Experimental and Constitutive Modeling Investigations of the Mechanical Behaviors of a Gravelly Soil Material Under Large-Size Triaxial Cyclic Tests

Modeling of gravelly soil with multiple lithologic components and its application

Three-dimensional elasto-plastic model for unsaturated compacted soils with different initial densities

Mineralogy, Micro-fabric and the Behavior of the Completely Decomposed Granite Soils

State-dependent induced dilatancy angle and hyperplasticity model for granular soils

Bounding Surface Model for Rockfill Materials Dependent on Density and Pressure under Triaxial Stress Conditions

A Unified Constitutive Model for Cemented/non-Cemented Soils under Monotonic and Cyclic Loading

A Conceptual Model for the Shakedown Response of Soft Clay to High-Cycle, Low-Amplitude Undrained Loading

New Double Yield Surface Model for Coarse Granular Materials Incorporating Nonlinear Unified Failure Criterion