Abstract:The settlement of any position of the municipal solid waste (MSW) body during the landfilling process and after its closure has effects on the integrity of the internal structure and storage capacity of the landfill. This paper proposes a practical approach for calculating the settlement and storage capacity of landfills based on the space and time discretization of the landfilling process. The MSW body in the landfill was divided into independent column units, and the filling process of each column unit was determined by a simplified complete landfilling process. The settlement of a position in the landfill was calculated with the compression of each MSW layer in every column unit. Then, the simultaneous settlement of all the column units was integrated to obtain the settlement of the landfill and storage capacity of all the column units; this allowed to obtain the storage capacity of the landfill based on the layer-wise summation method. When the compression of each MSW layer was calculated, the effects of the fluctuation of the main leachate level and variation in the unit weight of the MSW on the overburdened effective stress were taken into consideration by introducing the main leachate level's proportion and the unit weight and buried depth curve. This approach is especially significant for MSW with a high kitchen waste content and landfills in developing countries. The stress-biodegradation compression model was used to calculate the compression of each MSW layer. A software program, Settlement and Storage Capacity Calculation System for Landfills, was developed by integrating the space and time discretization of the landfilling process and the settlement and storage capacity algorithms. The landfilling process of the phase IV of Shanghai Laogang Landfill was simulated using this software. The maximum geometric volume of the landfill error between the calculated and measured values is only 2.02%, and the accumulated filling weight error between the calculated value and measured value is less than 5%. These results show that this approach is practical for satisfactorily and reliably calculating the settlement and storage capacity. In addition, the development of the elevation lines in the landfill sections created with the software demonstrates that the optimization of the design of the structures should be based on the settlement of the landfill. Since this practical approach can reasonably calculate the storage capacity of landfills and efficiently provide the development of the settlement of each landfilling stage, it can be used for the optimizations of landfilling schemes and structural designs.

Calculation Method of Stress Compression for Municipal Solid Waste

Study on the Calculation Method of One-Dimension Stress Compression for Municipal Solid Waste

Method for Calculating Settlement of Composite Ground under Rigid Foundation Considering Distortion Coordination

Study on the Properties of Stress Compression for Municipal Solid Waste

One-dimentional Calculation Method for Landfill Settlement Considering the Influences of Biodegradation and Multi-Stage Filling

Study on the capacity prediction of municipal solid waste landfill

Study on Compressibility and Settlement of a Landfill with Aged Municipal Solid Waste: A Case Study in Taizhou

Composite Exponential Stress-Strain Model of Municipal Solid Waste and Its Application

Stability and Safety Evaluation of One Solid Waste Landfill Site and Its Treatment Measures

Preliminary Analysis of the Bio-Mechanical Characteristics for High-kitchen Municipal Solid Waste

Study On The Duncan-Chang Model Parameters Of Stress Compression For Municipal Solid Waste

A Practical Approach for Calculating the Settlement and Storage Capacity of Landfills Based on the Space and Time Discretization of the Landfilling Process

Secondary Compression of Municipal Solid Wastes and A Compression Model for Predicting Settlement of Municipal Solid Waste Landfills

Landfill Storage Capacity Analysis Method by Considering Foundation Settlement and Its Application

One-dimensional Consolidation Model for Landfills Considering Solid-Liquid-gas Interaction

Parameter Determination of A Compression Model for Landfilled Municipal Solid Waste: an Experimental Study

Aging and compressibility of municipal solid wastes

Simulation Tests of Biodegradation and Compression of Municipal Solid Waste

Assessment Of Physical Vulnerability To Landfill Failure-Taking Shenzhen As An Example

Analytical solution for one-dimensional degradation-consolidation of saturated municipal solid waste

Settlement Model of Municipal Solid Waste Landfill