Abstract:Electrospinning is a manufacturing technique that can produce microfibers and nanofibers from polymeric solutions. It has a broad range of applications in areas such as tissue engineering, flexible electronics, filtering, etc. However, due to its chaotic behavior, the fibers obtained by this process are prone to high diameter variations. The high diameter variations will cause poor final product functionality. The diameter is affected by process variables, ambient conditions and in-situ measurements. It is therefore important to model their effect on the fiber diameter variation, which is rarely investigated in the literature. Towards this end, this paper systematically studies the electrospinning process of a biocompatible polymer (i.e., polyacrylonitrile (PAN) 10%) via experimental study and data-driven modeling. In particular, three critical process variables (i.e., voltage, tip-to-collector distance, and polymer flow rate), are varied in a central composite design of experiment. Twenty-four runs are executed for the data collection, during which the in-situ measurements are collected via a customized sensing system. After each experiment, scanning electron microscope (SEM) images are taken from the nonwoven mats and characterized to capture the diameter and the diameter variations. Three machine learning methods, Lasso, random forest (RF), and support vector machine (SVM), are applied to the collected data. The model performance is evaluated in the real case study on the electrospinning ofpolymeric solution. The most predictive model (RF) can yield an around 15% relative error for prediction in testing data on average over 100 replications.

Electrospun poly(methyl methacrylate) nanofibers and microparticles

Mesoporous Silica Fibers Prepared by Electroblowing of A Poly(Methyl Methacrylate)/Tetraethoxysilane Mixture in N,N-Dimethylformamide

Tuning Microparticle Porosity During Single Needle Electrospraying Synthesis Via A Non-Solvent-Based Physicochemical Approach

Poly(Methyl Methacrylate)/Silica Nanocomposite Fibers by Electrospinning

Electrospinning of Biomacromolecules for Controlled Drug Release

Electrospinning: a fascinating method for the preparation of ultrathin fibers.

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

Effect of hyperbranched poly(ester amine) additive on electrospinning of low concentration poly(methyl methacrylate) solutions

Electrospinning Of Fe, Co, And Ni Nanofibers: Synthesis, Assembly, And Magnetic Properties

Fabrication of Heterogeneous Scaffolds Using Melt Electrospinning Writing: Design and Optimization

Spraying Functional Fibres by Electrospinning

Electrospun Polymer Micro/nanofibers As Pharmaceutical Repositories for Healthcare.

Nanometre diameter fibres of polymer, produced by electrospinning

Coaxial electrospun poly(methyl methacrylate)-polyacrylonitrile nanofibers: atomic force microscopy and compositional characterization.

Electrospinning Nanofibers

Electrospinning of Polymers, Their Modeling and Applications

Fabricating Nanostructure Materials by Electrospinning Technique

Nanoporous Structured Submicrometer Carbon Fibers Prepared Via Solution Electrospinning of Polymer Blends.

Recent Advances in Electrospinning Supramolecular Systems.

Advances in Electrostatic Spinning of Polymer Fibers Functionalized with Metal-Based Nanocrystals and Biomedical Applications

Recent progress on functional electrospun polymeric nanofiber membranes