Abstract:Segmented carbon nanofibers were prepared by pyrolysis of acetylene on foam Ni at 600 and 700degreesC in a fixed bed flowed-reactor. The morphology, microstructure and lithium insertion properties of these carbon nanofibers were investigated by TEM, XRD, Raman and electrochemical methods. Through TEM observations, it was found that this kind of carbon nanofibers was composed of lens-like segments with nearly equal separation stacking along the nanofiber axis. When the reaction temperature was 600degreesC, segmented carbon nanofibers were the major production. However, when the reaction temperature increased to 700degreesC, the content of segmented carbon filaments decreased and their diameter became smaller. The crystallite size d(002) and L-c were determined by the 002 carbon Bragg peak of XRD patterns using the Bragg and Scherrer formulas. The intensity ratios of the 1350 cm(-1) line and the 1580 cm(-1) line (R =I-D/I-G) was used to evaluate the L-a value, which was inversely proportional to the effective crystallite size in the direction of the graphite plane (L-a). With the reaction temperature increased, the d(002) value decreased, L-a and L-c values increased, which indicated the degree of crystallinity increased. Segmented carbon nanofibers were used as positive electrodes of C/Li cells. The first charge capacities of C/Li cells were 480 and 300 mAh/g for samples produced at 600 and 700degreesC, respectively. The samples at 600degreesC showed capacities higher than the theoretical value of graphite, which was attributed to accommodation of more. lithium at the edge of graphene layers and on the surface of graphene layers according to the mechanisms of lithium insertion in carbons prepared by low-temperature pyrolysis of hydrocarbons. As confirmed by the XRD and Raman spectra, the samples at 700degreesC had larger L-a and L-c, which led to the capacity decreasing.

Lithium insertion performance of carbon nanofiber anode for lithium ion batteries

Study on Carbon Nanoparticles for Anode Materials of Lithium-Ion Battery

Electrochemical Intercalation of Lithium into Carbon Nanoparticles

Electrochemical Lithium Insertion Properties of Carbon Nanotubes Produced by Catalytic Pyrolysis of Acetylene

High Rate Reversibility Anode Materials of Lithium Batteries from Vapor-Grown Carbon Nanofibers

Preparation and Electrochemical Lithium Intercalation Performance of Segmented Carbon Nanofibers

Nanocomposites As Anode for Lithium-Ion Battery

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Study of Microstructure Change of Carbon Nanofibers as Binder-Free Anode for High-Performance Lithium-Ion Batteries

The preparation of carbon-coated Si nanofiber deposited on carbon nanofiber/natural microcrystalline graphite as the anode for lithium-ion batteries

A Novel Carbon–silicon Composite Nanofiber Prepared Via Electrospinning As Anode Material for High Energy-Density Lithium Ion Batteries

Fe 3 C@carbon Nanocapsules/expanded Graphite As Anode Materials for Lithium Ion Batteries

Characteristics of Electrochemical Insertion Lithium of Carbon Nanotubes

Electrospinning synthesis of C/Fe3O4 composite nanofibers and their application for high performance lithium-ion batteries

Revealing the Mechanism of Electrochemical Lithiation of Carbon Nanotube Fibers

A high performance silicon/carbon composite anode with carbon nanofiber for lithium-ion batteries

Kinetically accelerated and high-mass loaded lithium storage enabled by atomic iron embedded carbon nanofibers

Defective Lithium Storage Boosts High Rate and Long‐Life Span of Carbon Fibers

Electrochemical Properties of Carbon Nanofibers As the Negative Electrode in Lithium-Ion Batteries

Electrospun carbon–cobalt composite nanofiber as an anode material for lithium ion batteries

Effects of In Situ Graphitic Nanocarbon Coatings on Cycling Performance of Silicon-Flake-Based Anode of Lithium Ion Battery