Abstract:The use of room-temperature ionic liquids (RTILs) as green media for electrochemical application has attracted great attention recently. However, the effects of RTILs used as additives for electrodeposition of metals have hardly been explored. In the present work, the electrochemical deposition of copper was investigated on a pure copper plate from acid cupric sulfate solutions in the presence of RTILs (1-butyl-3-methylimidazolium tetrafluoroborate, [bmim] BF4) additive by cyclic voltammetric technique, scanning electron microscope (SEM), and X-ray diffraction (XRD). For comparison, the electrodeposition of copper from acid cupric sulfate solutions was also investigated. The voltammograms showed that the cathodic peak potential shifted toward more negative potential and cathodic peak current increased when 1.0 x 10(-4) mol x L(-1) [bmim] BF4 was added into acid cupric sulfate solutions. SEM images indicated that the shinning electrodeposits of copper were lamellar structure and the size of layered grain decreased with addition of [bmim]BF4 additive. The XRD results indicated that copper deposits exhibited face-centered cubic structure and (220) highly preferred orientation. The surface-enhanced Raman scattering (SERS) activities of copper deposits were measured by using methyl orange (MO) as the probe molecules. The copper electrodeposit obtained in acid cupric sulfate solutions with [bmim]BF4 is shown to be excellent substrate for SERS measurements, demonstrating significant enhancement and good stability. The enhancement factor was calculated to be up to 4.7 x 10(5). It was also found that copper electrodeposit stored for 60 days in air shows no significant degradation in its sensitivity.

Electrochemical oxidation of Ce(III) to Ce(IV) and deposition of copper powder in an electrolytic membrane reactor

Study on Electro-oxidizing Ce(III) in Surfuric Acid Media with Anion-exchange Membrane System

Electrolytic Oxidation of Ce(III) in Nitric Acid and Sulfuric Acid Media Using a Flow Type Cell

A simple modeling study of the Ce(IV) regeneration in sulfuric acid solutions.

Electro-Oxidation of Concentrated Ce(Iii) at Carbon Felt Anode in Nitric Acid Media

Deposition Of Ceo2 On Tio2 Nanorods Electrode By Dielectric Barrier Discharge Plasma To Enhance The Photoelectrochemical Performance In High Chloride Salt System

Copper reduction in a pilot-scale membrane-free bioelectrochemical reactor.

[Electrochemical deposition of copper by using ionic liquids as additive and its surface-enhanced Raman scatting effect]

Efficiently Improved Corrosion Resistance of Electrodeposition Ni–Cu Coatings Via Site‐Blocking Effect of Ce

Electrodeposition of Copper by IMPC Method

Improved electrochemical recovery of metallic powder from acidic chloride-citrate electrolyte

Surface Modification of Copper Oxide Nanosheets with CeO2 for Enhanced CO2 Reduction toC2H4

Enhancement of leaching copper by electro-oxidation from metal powders of waste printed circuit board

Effects of Fe(III) and Cu(I) on Electrodeposition and Microstructure Characterization for Acid Plating Bath

Study on Electrowinning Sheet-form Copper from Acidic Etchant Waste in Diaphragm Cell

Oxygen Evolution and Corrosion Behavior of Pb-CeO2 Anodes in Sulfuric Acid Solution

Electrochemical study of reduction Ce(III) ions and production of high purity metallic cerium by electrorefining in fused LiCl-KCl eutectic

Hydrophobic Ce-doped -PbO<sub>2</sub>-SDS anode achieving synergistic effects for enhanced electrocatalytic oxidation of As(III)

Nanosphere interlayer and CeCoO x powder modification for long-life and high-performance electrode applications in zinc electrowinning

Enhanced Removal of Copper by Electroflocculation and Electroreduction in a Novel Bioelectrochemical System Assisted Microelectrolysis.

Synergistic effects towards H2 oxidation on the Cu–CeO2 electrode: a combination study with DFT calculations and experiments