Abstract:In this study, the modeling of a six-degree-of-freedom (DOF) magnetic levitation platform actuated by noncontact Lorentz forces was analyzed. First, an analytic model of the actuator forces was studied, and the magnetic flux density in the working gap of the actuators was established using the Image Method, Ampere molecular hypothesis, and Biot-Savart law. The dynamics model of the floater actuated by the actuators was then built using the Newton-Euler method. Moreover, the double-pendulum chaotic nonlinear system of the hoisted floater was simplified as a single-DOF system, in which the interaction effects between two DOFs were considered. Furthermore, modeling of the platform control system was performed, which included an acceleration measuring unit with six uniaxial accelerometers, a position measuring unit with three two-dimensional PSDs, and a control unit that decouples the six-DOF control. Finally, an experimental setup was built to perform ground tests on the platform. The results verified the platform modeling; translational and rotational positioning accuracies were approximately 5 mu m and 40 mu rad at the six DOFs, respectively, and the vibrational suppression efficiencies were greater than 90% for low frequency disturbances. Moreover, Kalman estimators and disturbance observers were introduced into the controller to estimate the movement of the floater and observe the direct disturbance. Simulation testing demonstrated a significant improvement in the vibration-suppression performance of the platform.

On Control of Six Freedom Magnetostrictive Smart Structure

Modeling of a Six-Degree-of-freedom Magnetic Levitation Platform Actuated by Noncontact Lorentz Forces

DYNAMIC CONTROL OF TENSION STRUCTURES

Active Vibration Control of Flexible Structures with Super-Coiled Actuators

Six degree-of-freedom active vibration control using the Stewart platforms

Decoupled Adaptive Terminal Sliding Mode Control Strategy for a 6-DOF Electro-Hydraulic Suspension Test Rig with RBF Coupling Force Compensator

Six-degree-of-freedom active vibration isolation using a stewart platform mechanism

Six Degree-Of-Freedom Microvibration Hybrid Control System for High Technology Facilities

Six Degree of Freedom Active Isolation in Flexible Supporting Structures: Numerical Simulation and Experiment

Design And Control Of A Novel Six-Dof Maglev Platform For Positioning And Vibration Isolation

A Six Degrees-of-Freedom Vibration Isolation Platform Supported by a Hexapod of Quasi-Zero-Stiffness Struts

Dynamic Modeling and Simulation of 3-D.O.F. Vibration Active Isolation Platform Based on Giant Magnetostrictive Actuators

Modified multi-mode positive position feedback controller for active vibration controlof a smart flexible structure

Positioning and Vibration Control of a Magnetostrictive-Actuated Stewart Platform with Hysteresis Compensation

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

High-Performance Control Method for Six-Degreeof-Freedom Micro-Motion Stage Based on HighOrder Sliding Mode Control Theory

Modeling and Control of a Six Degrees of Freedom Maglev Vibration Isolation System

Multi-Degree-of-Freedom Hybrid Control System for High Technology Facilities

Dynamic modeling and robust nonlinear control of a six-DOF active micro-vibration isolation manipulator with parameter uncertainties

Kinematic Analysis and Control Strategy of 6-DOF Hydraulic Vibration Table

The Model of Active Vibration Control Based on Giant Magnetostrictive Materials