Abstract:Over the past two decades the use of near-/super-critical carbon dioxide has received much attention as a green alternative to organic solvents for chemical reactions, separations, and extractions because of its pressure-tunable physicochemical properties and economic advantages. However the advantages are diminished because of a relative narrow range of CO2-soluble materials. The goal of this work is to identify, design and synthesize oxygenated hydrocarbon-based CO2-soluble polymers that are able to serve as construction blocks for copolymers, dispersants, surfactants, thickeners, and chelating agents. Without concerning on the cost and the environmental persistence like fluorinated materials, the inexpensive, environmentally benign materials would significantly enhance the viability of near-/super-critical carbon dioxide-based technology. Based on both experimental heuristics and ab initio simulation results of molecular modeling (performed by Dr. Johnson's group), we proposed specific new polymer structures: poly(3-acetoxy oxetane) (PAO), poly(vinyl methoxymethyl ether) (PVMME), poly(vinyl 1-methoxyethyl ether) (PVMEE), and cellulose triacetate (CTA) oligomers. Phase behavior studies were also performed with novel CO2-philic compounds containing vinyl acetate, propylene glycol, or multiple tert-butyl groups. PAO, PVMME and PVMME were soluble in CO2, but not as soluble as poly(vinyl acetate). Oligomers of cellulose triacetate with as many as four repeat units solubilized into dense CO2 less than 14 MPa in the concentration range of 1-5 wt%. Phase behaviors of more than thirty compounds in dense CO2 were studied in this project. A new type of phase behavior for solid (at ambient temperature) CO2-philes that melt and dissolve in CO2 was detailed using a model binary mixture of β-D-maltose octaacetate and CO2. Copolymers of tetrafluoroethylene (TFE) and vinyl acetate (VAc) exhibited lower miscibility pressures than either of the homopolymers, probably due to quadradentate binding configurations with CO2. Phase behavior investigation of poly(propylene glycol) (PPG) monobutyl ether in CO2 demonstrated ether-CO2 interactions should receive as much attention as carbonyl-CO2 interactions when designing CO2-philic functional groups. 1,3,5-tri-tert-butylbenzene and tri-tert-butyl-phenol were both extraordinarily soluble in CO2, and are excellent candidates for CO2-soluble sand binders. In summary, although a new CO2 thickener was not identified, new non-fluorous CO2-soluble materials were identified that were, in general, acetate-rich with flexible chains, weak self-interactions, and multidentate interaction between CO2 and solute functional groups.

Co2-In-Water Emulsion-Templated Poly(Vinyl Alcohol) Hydrogels Using Poly(Vinyl Acetate)-Based Surfactants

Continuous Production of Multifunctional Porous Materials Via Photo-Crosslinking of Ice Templated Emulsions

Fabrication of Hydrophilic and Sponge-Like PVDF/brush-like Copolymer Blend Membranes Using Triethylphosphate As Solvent

In Situ Crosslinking of Hyperbranched Polyglycerol in Casting Solutions and Its Effect on the Structure and Properties of Porous Pvdf Membranes

Synthesis and Phase Behavior of CO<sub>2</sub>-Soluble Hydrocarbon Copolymer: Poly(vinyl acetate-<i>alt</i>-dibutyl maleate)

Synthesis of CO2-philic/hydrophilic surfactant with brush structure and its application in preparing monolithic materials

A Simple and Environment-Friendly Approach for Synthesizing Macroporous Polymers from Aqueous Foams

One-step poly vinyl alcohol-based hydrogel preparation using subcritical water/CO2 process

Facile Synthesis of Macroporous Zwitterionic Hydrogels Templated from Graphene Oxide-Stabilized Aqueous Foams

Facile Preparation of Poly(n-Isopropylacrylamide)-based Hydrogels Via Aqueous Diels–Alder Click Reaction

Polyvinyl alcohol composite gel membrane modified by natural polysaccharide and waterborne polyurethane

An Alkaline Based Method for Generating Crystalline, Strong, and Shape Memory Polyvinyl Alcohol Biomaterials

Co2 Stimuli-Responsive, Injectable Block Copolymer Hydrogels Cross-Linked By Discrete Organoplatinum(Ii) Metallacycles Via Stepwise Post-Assembly Polymerization

Emulsion Copolymerization of Vinyl Chloride with Poly (ethylene Glycol) Methyl Ether Methacrylate

Thermoresponsive and photocrosslinkable PEGMEMA-PPGMA-EGDMA copolymers from a one-step ATRP synthesis

Robust Hydrogel with Significant Swelling Resistance via the Synergy of Hydrogen Bond Regulation and Ionic Cross-linking

Photoinitiator-grafted polymer coating enable various hydrogels with strong resistance to both drying and swelling

IDENTIFICATION, DESIGN AND SYNTHESIS OF OXYGENATED HYDROCARBON-BASED CO2-SOLUBLE POLYMERS FOR CHEMICAL AND PETROLEUM ENGINEERING APPLICATIONS

Aggregates and hydrogels prepared by self-assembly of amphiphilic copolymers with surfactants.

Molecule structure design by synergistic crosslinking in the PVA matrix and its physical properties regulation

Tailored Pore Size and Hydrophilicity: Advancing Poly(vinyl formal) Sponges for Efficient Emulsion Separation