Electrochemical degradation of diuron via the BDD electrode and the influential factors involved
Xu ZOU,Shi-qing ZHOU,Xian-lei LU,Yang-hai YU,Shi-rong XU
DOI: https://doi.org/10.13637/j.issn.1009-6094.2017.06.053
2017-01-01
Abstract:In this paper,we are going to make an investigation of the electrochemical degradation of diuron by using the borondoped diamond (BDD,the boron doped diamond) anode,the mixed metal oxides (MMO,IrO2-Ta2O5/Ti) anode and the Pt anode in phosphate,chloride or sulfate electrolytes.Our investigation has confirmed that,the hydroxyl radical (· OH),sulfate radical (SO4-·),active chlorine (Cl2,HClO,ClO-),and persulfate (S2O~-) should be responsible for the degradation of diuron in the phosphate,chloride,and sulfate electrolytes correspondingly and respectively.Among them,BDD anode has been known for its best performance among the aforementioned three electrolytes,which is followed by MMO and Pt anode.As a kind of non-active anode,the · OH generated on the surface of BDD anode tends to react directly with the target contaminants with no interaction with the electrode.However,the · OH generated on the surface of the active anode (e.g.,MMO and Pt electrode)tends to preferably interact with the electrode surface,so that the MMO and Pt anodes reveal their weaker oxidation capacity than the BDD anode in the phosphate electrolyte,with the pseudo-first order rate being constant in diuron degradation of 0.059 min-1,0.015 min-1,0.009 min-1 for BDD,MMO and Pt anode,respectively.In the experiment with the chloride electrolyte,· OH can be observed and found playing a significant role in chlorine generation in the BDD anode,which is different from those of MMO and Pt,with their pseudo-first order rate being constant in diuron degradation,that is,O.092 min-1,O.067 min-1,O.019 min-1 for BDD,MMO and Pt anode,respectively.What is more,in the sulfate electrolyte,it would be poosible for the BDD anode to activate the sulfate electrochemically due to its high oxygen evolution potential,whereas the degradation rate of diuron tends to increase with the decrease of the solution pH.Furthermore,we have noticed that the influences of the initial diuron concentration,the current density,the submerged area of the electrodes and the initial solution pH on the diuron degradation situation can also be evaluated with the BDD anode for its better performance on diuron degradation.The results of the above-mentioned experiemnts demonstrate that,when the initial concentration of diuron is increased,the degradation rates with the help of BDD anode tend to increase first and then decrease.On the other hand,not only the degradation rate of diuron,but also the energy consumption tend to increase when the current density and the submerged area of the electrodes tend all to get increased.