Abstract:The no-insulation (NI) high-temperature superconductor (HTS) winding technique enables the fabrication of highly compact magnets with self-quench protection. NI pancake coils are implemented to develop a 28-T HTS magnet for the operation of a 792-GHz gyrotron, which is a microwave source for dynamic nuclear polarization nuclear magnetic resonance. To this end, three NI all-GdBCO double pancake (DP) magnets were fabricated using different winding diameters and procedures. The objective was to explore different mechanical coil protection mechanisms at high magnetic fields, including clamping, overband, and solder impregnation. Experiments in liquid helium using magnets with winding diameters of 18, 25, and 66 mm yielded a center field of 14.4, 11.2, and 8.1 T, respectively. The maximum currents applied to the DP magnets ranged from 780 to 1000 A. Both the 18 and 66 mm DP coils contained 400 m (2 × 200 m) HTS tape, while the 25 mm seamless DP coil consisted of only one continuous 200 m HTS tape. The 25 mm magnet with solder impregnation showed the best repeatability, although the current density was reduced owing to the solder thickness between the coil windings. Critical to the implementation of such coils in liquid helium is to effectively transfer high currents to the magnet, while not compromising the helium boil-off. Furthermore, the design of hybrid copper-HTS current leads capable of carrying current larger than 1000 A from room temperature to the HTS magnet at 4.2 K is presented. The implementation of liquid nitrogen-cooled hybrid copper-HTS current leads reduced the helium boil-off and permitted independent temperature control of the current leads.

Development Of A Large Bore Superconducting Magnet With Narrow Liquid Helium Channels

Development of Large-Bore Superconducting Magnet

Development of Large-Bore Superconducting Magnet with Zero-Vapor Liquid Helium

Development of YBCO Insert for a 25 T All Superconducting Magnet

Development of Split Superconducting Magnet With Large Bore for Material Processing Applications

A Superconducting Magnet with Center Field of 10 T and Φ100 Mm Warm Bore

Design of Superconducting Magnet for Background Magnetic Field

Fabrication and Test of an 8-T Superconducting Split Magnet System with Large Crossing Warm Bore

Development of Large Scale Superconducting Magnet with Very Small Stray Magnetic Field for 2 MJ SMES

Design Study on a 9.2-T NbTi Superconducting Magnet with Long-Length Uniform Axial Field

Design and Fabrication of a Cross-Warm-Bore Split-Gap Superconducting Magnet System

Development of a Superconducting Magnet for High Magnetic Force Application

Fabrication of A 10 Tesla Cryogen-Free Superconducting Magnet

Tests on a 6 T Conduction-Cooled Superconducting Magnet

The Design and Winding Method of A Conduction-Cooled 1.5 T Bi-2223 High Temperature Superconducting Magnet

Design study of conduction-cooled high temperature superconducting magnet

The Conceptual Optimal Design of a 300MJ High Temperature Superconducting Magnet

Development of a Zero Boil-off Helium Cryostat for Superconducting Magnets

Fabrication Procedures and Mechanical Supports of No-Insulation All-GdBCO Double Pancake Magnets in Liquid Helium

High Magnetic Field Superconducting Magnet with Zero Helium Boil-Off for Nuclear Magnetic Resonance Spectrometer

Development of Testing Device for Critical Current Measurements for HTS/LTS