Abstract:Magnetic encoders are composed of a magnetic sensor, a hard magnetic recording medium and a signal processing circuit. Electrodeposited micro-magnet arrays produced by micro-fabrication are promising recording media for enhancing encoder performance. However, two major engineering issues have yet to be resolved. One issue is an unknown relationship between the feature sizes of micro-magnet arrays and their stray field shapes, and another issue is the formation of micro-cracks due to the built-up residual stresses of thick films. In this study, we investigated the effect of feature sizes on the emanating stray field shape at various observation heights. Feature sizes include two height (i.e., film thickness) values of 78 μm and 176 μm, and both width and spacing with three values of 360 μm, 520 μm and 680 μm. Ultrasound-assisted agitation was adopted for investigating the effects of electrodepositing current densities on the film crystalline microstructures and magnetic properties. Narrowing the width of micro-magnets helps the stray field to become a sinusoidal profile. Thinner film, i.e., thickness 78 μm in this study, supports the stray field taking on a sinusoidal profile. Moreover, the spacing between the micro-magnets plays a key factor in determining the shape of the stray field. Under 37 kHz/156 W ultrasound agitation, the optimal hard magnetic properties of electrodeposited CoMnP films are residual magnetization 2329 G and coercivity 968 Oe by a current density of 10.0 mA/cm2. Ultrasound-assisted electrodeposition, along with duly designed feature size, facilitates the micro-magnet arrays having a sinusoidal stray field shape using high quality films. Furthermore, for the first time, a systematic understanding of feature-size-dependent stray field evolution and improved polarities quality has been realized for the recording media of sinusoidal magnetic encoders.

Design of Output Voltage Waveform on Magnetic Encoder

A Novel Magnetic Linear Encoder Designed by Using the Slant Multi-Phase Filtering Model

Model of MR Sensor with Slant Multiphase Filtering

Demodulation Algorithm of Magnetic Encoder With Specified Harmonic Elimination

Simulation of output voltage waveform on thin film magnetoresistive sensor

Design of Single-pole Magnetic Encoder Based on Calibration

Design of Single Pair-pole Magnetic Encoder Based on Looking-up Table

A Novel Absolute Magnetic Encoder Based On Pseudorandom Code

Non-sinusoidal Output Voltage for Multiphase Variable Speed Drives with Space Vector PWM

Magnetic Rotary Encoder and Its Application in PMSM

Design of Absolute Multi-Pole Shaft Encoders

Study on a Novel Absolute Magnetic Encoder

Development of a combined magnetic encoder

Design and Development of an Optical Encoder with Sub-Micron Accuracy Using a Multiple-Tracks Analyser Grating.

Periodically Sinusoidal Magnetic Stray Field and Improved Film Quality of CoMnP Micro-Magnet Arrays for Magnetic Encoders by Electrodeposition with the Assistance of Ultrasound

The design of a single-pole magnetic encoder used in the frame platform of the seeker

An Adaptive Approach Based on Neural Network and Phase-Locked Loop for Correcting Quadrature Sinusoidal Signals of Magnetic Encoders

Implementation of Embedded Magnetic Encoder for Rotor Position Detection Based on Arbitrary Phase-Shift Phase-Lock Loop

A Novel Angle Segmentation Method for Magnetic Encoders Based on Filtering Window Adaptive Adjustment Using Improved Particle Swarm Optimization

Kriging-Assisted Multiobjective Optimization of Embedded Magnetic Encoder in PM Synchronous Machines

Improving the Accuracy of Multipole Magnetic Encoder by Three-Phase Hall