Pd/Al Bimetallic Nanoparticles for Complete Hydrodechlorination of 3-Chlorophenol in Aqueous Solution
Bo Yang,Shubo Deng,Gang Yu,Yonghong Lu,Hong Zhang,Jianzhong Xiao,Gang Chen,Xiaobing Cheng,Lili Shi
DOI: https://doi.org/10.1016/j.cej.2012.11.108
IF: 15.1
2012-01-01
Chemical Engineering Journal
Abstract:Nanoscale Al particles with average diameter of about 100nm were employed to prepare Pd/Al nanoparticles (NPs) by chemical displacement deposition. It was proved that Pd2+ acidic deposition solution was superior to its alkaline deposition solution in terms of Pd loading rate on Al NPs. The Pd/Al NPs were characterized by ICP–OES, SEM, TEM, XRD, BET and then used to explore hydrodechlorination (HDC) performance of 3-chlorophenol (3-CP) in aqueous solution. Major factors affecting HDC efficiency were investigated including Al substrate sizes, pH, Pd loadings in Pd/Al NPs, dosage of Pd/Al NPs, and temperature. The optimal results indicated that nanoscale Pd/Al bimetallic particles were highly effective for 3-CP HDC. HDC efficiency was only about 30% in 50min reaction with micron sizes of Pd/Al particles (100–400 mesh), whereas it increased to 99.7% within 30min using Pd/Al NPs at 25°C. Aqueous pH presented remarkable effect on HDC and pH 3–4 was the optimum range for HDC as pH varied from 2 to 11. Pd loadings and Pd/Al dosages were optimized for highly effective HDC as 1.16wt.% and 2g/L, respectively. In addition, higher HDC performance was obtained while reaction temperature arrived at 45°C and 0.389mM of 3-CP could be completely dechlorinated into phenol only within 10min reaction.